Structured Cabling, Cat5e, Cat6 and Cat6A Warranty
The 25 Year Warranty covers all permanent copper cabling, outlets and jacks within the horizontal cabling of a Cat5e, Cat6 or Cat6A structured cabling system which has been tested and certified as an Ultima Cat5e, Cat6 or Cat6A system.
All other provisions in our standard terms and conditions shall continue to apply.
All links must be installed and tested by an Ultima Certified
Installer (UCI) in accordance to Ultima and industry guidelines to qualify for the warranty.
Certification tests for Cat5e/ Class D, Cat6/Class E or Cat6A/ Class EA must be carried out on all outlets by the UCI and submitted to Ultima for approval in order for a system to qualify as a certified system and thus be covered by the warranty. A suitable copper cabling certifier, as approved by Ultima, must be used. The results must be sent to Ultima in the form of an email or CD ROM, utilising the manufacturer’s software.
Copper (Horizontal 4 pair) • 100% of all horizontal links are to be tested as permanent links
• Full results must be submitted for each link
• Results to be submitted in the original tester format (see box below)
• The cabling system must be installed in accordance with the published standards for structured cabling in place at the time of installation
equipment shall support the standard for which the warranty is being sought
Important
• The test equipment shall support the standard for which the warranty is being sought
• The tester equipment shall be calibrated in accordance with the tester manufacturer’s requirements
• Where the date of the results is outside the tester manufacturer’s calibration period, the results will not be accepted and the warranty application will be rejected
• The test results shall be submitted in the tester manufacturer format (e.g. Lantek Reporter or Fluke Networks LinkWare)
• Full graph data shall be included in the results (this is set prior to testing)
• The tester shall be set to the correct cable characteristics (i.e. cable type and NVP) as per the product’s published specifications
• Do NOT submit duplicate results • The latest tester software and firmware shall be installed
• The warranty shall be issued against the standard tested. E.g EN 50173 Class E
• Ultima reserves the right to decline the warranty if test results are altered in any way
120
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124
