Microwave Supplies and Calibration Aids Microwave Leakage Detector


Evaluate microwave oven leakage and other environmental safety concerns. Features maximum and minimum hold, an audible alarm, and a zero adjustment to eliminate background EMF. The display also indicates overload and low battery. Comes with a soft carrying case and standard 9V battery, which provides approximately 100 hours of use.


Dimensions: 5¼” x 2¼” x 1¼" (130 x 56 x 38mm). Weight: 6oz (170g).


Specifications Display


RF Power Density RF Frequency


Microwave Frequency Resolution Accuracy Axis


Alarm


Operating Temp Operating RH


Cat. No. 72083-00 AirChek® Description


Microwave Leakage Detector Badges


Monitor vapor levels, simply and effectively.


Airchek Badges provide an innovative, simple and effective system for monitoring vapor levels, including Formaldehyde, Glutaraldehyde, Xylene, Toluene, and Isopropanol.


The badges are simply clipped on to the technician's clothing and a record is kept of


name, location and time, providing continuous sampling for personal monitoring and allowing the measurements required under Government regulations.


One badge provides continuous sampling over 8 hours. A second badge can be used to supply information for analysis of 15-minute peak exposure periods.


Cat. No.


64472-10 64472-20 64472-30 64472-40 64472-50


Description AirChek® AirChek® AirChek® AirChek® AirChek®


Badge, Formaldehyde Badge, Glutaraldehyde Badge, Xylene Badge, Toluene


Badge, Isopropanol Alpha-Numeric Oven Tray*


EMS EXCLUSIVE Made from polypropylene, Each line is spaced 1 cm apart with letters along the sides and numbers across the top and bottom. This tray has ruled lines that aid in the reproducible placement of the specimens in the oven.


Cat. No. 97035-01 6 Description Alpha-Numeric Oven Tray Qty. each


Qty. 6/pk 6/pk 6/pk 6/pk 6/pk


Microwave Calibration Slide Set*


EMS EXCLUSIVE A calibration slide for microwave staining. A set which includes two glass slides. Slide #1 has liquid crystal squares corresponding to the following temperatures: 35°C, 40°C, 45°C; Slide #2 has liquid crystal squares corresponding to the following temperatures: 50°C, 55°C, and 60°C.


3¾ digits, maximum reading 3999 0.003~2.700 mW/cm² 50MHz ~ 3.5GHz 2450MHz


0.001mW/cm²


±2dB @ 2.45GHz ±50MHz Single


@ readings >1mW/cm²


41°F ~ 104°F (5°C ~ 40°C) <80% RH


Qty. each


This calibration set will ensure reproducible programming of the oven to achieve an ideal target


temperature of large staining volumes (50-200ml solution). Cat. No.


Description 97031-01 Microwave Calibration Slide Set Stain-’N’-Temp Slide*


EMS EXCLUSIVE This device is used as an aid when programming a microwave oven to achieve an ideal target temperature of 20-100ml staining volumes. The tool is designed to give quantitative temperature information about the droplet during staining of tissue sections on electron microscope grids.


This unit is a 4-well PTFE-coated glass slide, each well 8mm in diameter which will maintain the uniform shape of the droplet; 4 liquid crystal temperature strips ranging from 35° to 50° are affixed to each well to monitor the microwave oven temperature.


Cat. No.


97030-01 97030-06


Description


Stain-’N’-Temp Slide Stain-’N’-Temp Slide


Fix-’N’-Temp Container*


EMS EXCLUSIVE This container will permit rapid specimen handling and provides temperature information during microwave irradiation. A liquid crystal strip is affixed into the bottom of a 35mm diameter petri


dish and covered with a thin layer of EMbed resin. The temperature range is 35°C–60°C. This container is ideal for tissue fixing by microwaves. The two active temperature windows are 45°C and 50°C.


Cat. No.


97033-01 97033-06


Description


Fix-’N’-Temp Container Fix-’N’-Temp Container


Qty. each 6/pk


Qty. each 6/pk


Qty. set


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8