EMS 9000 Precision Pulsed Laboratory Microwave Oven


State-of-the-art solution for performing many of the steps in sample preparation prior to either light or electron microscopy Overview


The EMS 9000 Laboratory Microwave Oven represents a state-of-the-art solution for performing many of the steps in sample preparation prior to either light or electron microscopy. Procedures such as fixation, staining, dehydration, decalcification, impregnation, polymerization as well as immunohisto and cytochemistry can be done with ease in the EMS 9000.


The EMS 9000 offers a significant reduction in processing times while obtaining improved results.


Features n 900 watt nominal output with variable wattage n Bubble manifold for 5 tubes n Forced exhaust system with fail-safe interlock


n Adjustable duty cycle-one second and greater for very precise process control


n Magnetron pre-warming n Right side closet n Vacuum system for rapid infiltration (optional) n Load cooler/circulation system (optional) n Three different timer modes n Multiple safety interlocks n Visual and aural warnings on errors and malfunctions n All controls are automated n Flexible temperature probe


Advantages


n Ease of use: User-friendly touch keypad to set and store all parameters-programmable


n Multiple running modes n Multiple bubble mixing (5 ports) n Adjustable temperature probe n Ventilation n Optional vacuum cycling for rapid infiltration n Optional Load cooler n Safety exhaust fans with fail safe interlock n Integrated on board digital controller


For Optimum Results


The EMS 9000 features a touch pad keyboard that allows for all settings to be programmed quickly and easily. With a very well defined adjustable effect, accurate temperature control, well ventilated chamber, and three different timing modes, the EMS 9000 is the most advanced microwave processor available today.


For Temperature Control


Our temperature control not only prevents the tissue in the chamber from becoming denatured (by high temperature) but it also assists in pulsing the microwave effect in small precise portions. The temperature control has a direct effect on the magnetron for it allows the unit to switch on and off in the most efficient way at the preset effect level. The temperature probe is mounted on a ball swivel that allows for easy placement of the probe within the microwave chamber. In addition, the probe is made from stainless steel and it is quite flexible so that it may be bent and formed as required to place it in various shaped containers. The temperature sensor is located at the tip of the probe.


Bubble Mixing from up to 5 Tubes


Inside the chamber there is a manifold for up to 5 tubes that allows you to achieve bubble mixing in from one to five containers at the same time. There is a built in air pump that facilitates the mixing and avoids temperature gradients in the mixing process. These adjustable bubble mixers make the EMS 9000 ideal for decalcification.


2


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8