EMS LABELS, TAPES, & DISPENSERS EDITION III SPECIALTY LABELS
zzz Xylene Resistant Thermal Transfer Labels
Pre-cut, Peel-off labels for thermal transfer printers
Xylene-Resistant - Polyester labels provide strong solvent resistance, specifically to multiple xylene washes as well as longer term exposure to xylene.
Versatile - Temp. Range: -40°C to 121°C. Xylene labels resist boiling water baths, autoclaving and moderate freezer temperatures.
Specially Designed - Rolls are specially top-coated to readily accept thermal transfer printing.
Convenient - Labels are available in a microscope slide size as well as a unique general purpose size for multiple uses.
Note: 100% Virgin polypropylene tubes are recommended. Avoid the use of siliconized surfaces
Cat. No.
77598-10 77598-20 77592-55
Label Size
0.875 x 0.875” (22 x 22mm) 1.69” x 0.625” (43 x 16mm)
Resin Ribbon – 2.50” x 244’ for TLP 2844
zzz HyhiTAG™ Thermal Transfer Labels
Autoclave-resistant permanent labels
FEATURES z Waterproof and weatherproof
z Temperature range from -60°C to +150°C (-76° F to + 300°F)
Cat. #
Use these high temperature labels for the identification of various containers and surfaces for autoclaving and dry heat sterilization.
Apply them to metal, plastic, and glass surfaces. They will withstand autoclave sterilization cycles at 132°C (270°F) at 30psi pressure.
These labels and their print will survive high temperature exposures and are ideal for identifying containers and surfaces that need to be sterilized inside autoclaves, dry-heat sterilizing equipment and gamma irradiators.
Color options: W=White, BL=Blue, G=Green, O=Orange, P=Pink, R=Red, Y=Yellow
zzz Removable HyhiTAG™ Thermal Transfer Labels
High temperature removable labels for the identification of various containers and surfaces intended for autoclaving, dry heat sterilization and gamma irradiations.
Removability of the labels should be tested on substrates in end-user conditions.
HyhiTAG™ Thermal Transfer Labels Color Core Label Size
77426-01W 77426-02W 77426-03W 77426-04W 77426-05W 77426-06W 77426-07W 77426-07BL 77426-07G 77426-07O 77426-07P 77426-07R 77426-07Y 77426-08W 77426-08BL 77426-08G 77426-08O 77426-08P 77426-08R 77426-08Y 77426-09W 77426-10W 77426-11W 77426-12W
Removable HyhiTAG™ Thermal Transfer Labels Labels Across
White 1" 1 x 0.6875" (25.4 x 17.5mm) 1 rectangle White 3" 1 x 0.6875" (25.4 x 17.5mm) 1 rectangle White 1" 1.3 x 0.625" (33 x 15.9mm) 1 rectangle White 3" 1.3 x 0.625" (33 x 15.9mm) 1 rectangle White 1" 2 x 1" (50.8 x 25.4mm) White 3" 2 x 1" (50.8 x 25.4mm) White 1" 2 x 4" (50.8 x 101.6mm) Blue
1" 2 x 4" (50.8 x 101.6mm)
Green 1" 2 x 4" (50.8 x 101.6mm) Orange 1" 2 x 4" (50.8 x 101.6mm) Pink Red
1" 2 x 4" (50.8 x 101.6mm) 1" 2 x 4" (50.8 x 101.6mm)
Yellow 1" 2 x 4" (50.8 x 101.6mm) White 3" 2 x 4" (50.8 x 101.6mm) Blue
3" 2 x 4" (50.8 x 101.6mm)
Green 3" 2 x 4" (50.8 x 101.6mm) Orange 3" 2 x 4" (50.8 x 101.6mm) Pink Red
Yellow 3" 2 x 4" (50.8 x 101.6mm)
3" 2 x 4" (50.8 x 101.6mm) 3" 2 x 4" (50.8 x 101.6mm)
Perf. Labels/Roll No No
1 rectangle 1 rectangle 1 rectangle 1 rectangle 1 rectangle 1 rectangle 1 rectangle 1 rectangle 1 rectangle 1 rectangle 1 rectangle 1 rectangle 1 rectangle 1 rectangle 1 rectangle 1 rectangle
White 1" 2.25 x 1.25" (57.1 x 31.7mm) 1 rectangle White 3" 2.25 x 1.25" (57.1 x 31.7mm) 1 rectangle White 1" 2.63 x 1.125" (66.8 x 28.6mm) 1 rectangle White 3" 2.63 x 1.125" (66.8 x 28.6mm) 1 rectangle
Removable HyhiTAG™ Thermal Transfer Labels 77426-13W 77426-14W
White 1" 3 x 2" (76.2 x 50.8mm) White 3" 3 x 2" (76.2 x 50.8mm)
1 rectangle 1 rectangle
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Yes Yes
2,000 2,000 1,000 1,000 2,000 2,000 250 250 250 250 250 250 250 250 250 250 250 250 250 250
2,000 2,000 2,000 2,000
1,000 1,000
7 Ideal Use
Microscope Slides General Purpose
Unit
1000/roll 1000/roll each
62053-R
1.69" x 0.625" 77598-20
Xylene Resistant Sizing Guide
0.875" x 0.875" 77598-10
RELATED PRODUCTS...
zzz Solvent Resistant Pens Feature an ultra-permanent ink.
z Resistant to xylene, alcohol, acetone and formalin
z Ideal for histology and cytology
z Markings will not run on embedding cassettes or frosted/painted slides and labware, even afterrepeated washes and solution treatments
z Remove markings with acetic acid, an ethanol/xylene mixture or paraffin
z Testing advised before use
Note: These pens work best on labels or frosted surfaces. They do not work well on smooth surfaces, such as glass or plastic.
Cat No. 62053-B
Description
Solvent Resistant, Black Extra Fine 0.6mm
Solvent Resistant, Red Extra Fine 0.6mm
Qty. each each
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40