EMS LABELS, TAPES, & DISPENSERS EDITION III TAPES AND DISPENSERS


zzz Light-Bloc Labels


Security – Protect light sensitive chemicals and reagents including fluorescent label conjugated antibodies


Pre Sized – Ideally sized for 15ml and 50ml centrifuge tubes makes label application easy


Multiple Uses – Ideal for labeling live cells, bacteria, DNA, protein with fluorescent labels or making up and storing light sensitive fluorescent label stock solution


77597-20 4.75" x 3.75" (12.07cm x 9.5cm) 50ml centrifuge tubes 100/roll zzz Perf-Tape™


Slit-Perforated Laboratory Tape — No Scissors Needed!


Convenient - Slit-perforated every 1.25” to allow for clean tearing every time


Quick - Don’t waste time with scissors, simply tear and apply!


“Invisible” Perfs - High-tech perforations are designed to remain “invisible” when tape is marked and may be written over Strong - Perf-Tape™ won’t tear while it is being unrolled No residue - Leaves no adhesive residue when peeled off Water resistant - Also oil and acid resistant Temperature - Withstands cold (-23ºC) and hot (121ºC) temperatures


0.75” x 500” (19mm x 12.7m) w/1.25” perforation Cat. #


3676-W 3676-Y 3676-G 3676-B 3676-R


Color White Yellow Green Blue Red


Qty. Roll Roll Roll Roll Roll


0.75” x 2,160” (19mm x 54.9m) w/1.25” perforation Cat. #


3677-W 3677-Y 3677-G 3677-B 3677-R


Color White Yellow Green Blue Red


Qty. Roll Roll Roll Roll Roll


zzz Rocker Tape Double-Sided Adhesive Film for Laboratory Containers


zzz Kapton® Kapton®


Polyimide Film Tape Polyimide Tape is known for its superior


ability to maintain its physical properties under harsh conditions. This general purpose film easily bonds to difficult surfaces with silicone adhesive, and leaves little to no residue when removed. Microscopists find it ideal for holding samples or masking during deposition in vacuum systems (it is relatively low outgassing). It is also perfect for positioning samples in cryo or high temperature working conditions. There are no known organic solvents for the film.


Kapton® is a trademark of DuPont™


SPECIFICATIONS Temperature Range Adhesive


Flammability Ratio Roll Length Color


Kapton® Film Thickness


Tensile Modulus (GPa) Melting Point


Plastic Core Diameter zzz Kapton®


77708-02 77708-03 77708-04 77708-05


Kapton® Kapton® Kapton® Kapton® Kapton®


-269 to 400°C (-452 to 752°F) Silicone V-0


32.9 m (36 yds) Amber 1 mil


Ultimate Tensile Strength (Mpa) 231 (73°F); 134 (392°F) Ultimate Elongation (%) Density, g/cc


72 (73°F); 83 (392°F) 1.42


2.5 (73°F); 2.0 (392°F) none


77mm (3") Standard Polyimide Film Tape


Tape thickness with adhesive: 2.7 mil. No liner. 77708-01


Standard Tape, ¼" Standard Tape, ½" Standard Tape, ¾" Standard Tape, 1" Standard Tape, 2"


zzz Kapton®


77708-07 77708-08 77708-09 77708-10


Film Tape


36 yds 36 yds 36 yds 36 yds 36 yds


Tape thickness with thinner layer of adhesive: 2.5 mil. No liner. 77708-06


Kapton® Kapton® Kapton® Kapton® Kapton®


zzz Kapton®


77708-11 77708-12 77708-13


Mounting Convenient - No more fumbling with clamps Versatile - Use with rockers, shakers, incubators or nutators Strong - Easily rock and roll up to 300rpm and beyond* Long Lasting - Re-usable based on load capacity and vessel number


Resistent - Keeps on rockin’ even in the prescence of most solvents and caustic agents * RPM limits may vary based on load and vessel contact area. Test load recommended Cat No.


Description


77512-12 77512-20


16 1.50” x 20’ (38mm x 6m) Rocker Tape Sheets, 12" x 12"


Qty. roll


3/pk


Thin Tape, ¼" Thin Tape, ½" Thin Tape, ¾" Thin Tape, 1" Thin Tape, 2"


36 yds 36 yds 36 yds 36 yds 36 yds


Double-Sided Polyimide Film Tape


Tape thickness with adhesive on both sides: 4 mil. Clear polyester liner covers one side.


Kapton® Kapton® Kapton®


zzz Kapton®


77708-14 77708-15 77708-16 77708-17 77708-18


Double-Sided Tape, ½" 36 yds Double-Sided Tape, ¾" 36 yds Double-Sided Tape, 1"


36 yds Polyimide Film Tape


Kapton® Kapton® Kapton® Kapton® Kapton®


each each each


Low-Static, Single-Sided, Thin Adhesive


ESD additive in the adhesive reduces the static charge. Tape thickness with adhesive: 2.6 mil. No liner.


Low-Static Tape, ¼" Low-Static Tape, ½" Low-Static Tape, ¾" Low-Static Tape, 1" Low-StaticTape, 2"


36 yds 36 yds 36 yds 36 yds 36 yds


each each each each each


each each each each each


Single-Sided, Thin Adhesive Polyimide


each each each each each


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40