EMS-002 Rapid Immersion Freezer


Environmental Chamber Forceps Part # 37460


Special forceps used with the Environmental Chamber. The standard Plunge Freezer forceps (p/n 37458) are not compatible with use in conjunction with the Environmental Chamber due to space constraints inside the chamber.


Freeze Forceps Part # 37458


Special tweezers specifically for use with the Plunge Freezer that is “self-locking”. Extra sets allow quicker turn around when freezing multiple samples.


Propane Transfer System Part # 37015


Allows for the efficient transfer of propane to the condensation chamber from the propane storage vessel. A quite simple device consisting of a Propane regulator, Propane hose


1.75m, handle to control the speed at which the propane flow out of the supply tank. Finally a specially modified tip made of Copper that can be chilled in LN2 so less time is required to fill the condensing chamber. this means less Propane gas being generated during the process, which makes the lab safety people much happier. The regulator is shipped without a connection to the Gas supply since this is different from place to place.


Recycling and Operating Costs


The recycling time of the device is less than three minutes, just long enough for it to be ready when you finish processing the last sample. The operating cost is about 0.47 per sample, depending on the price of liquid nitrogen. The device will operate for about two hours on 10 L of liquid nitrogen, including the initial cool down.


37457 37460 37015 37458


OUR MAIN INTERACTIVE WEBSITE: www.emsdiasum.com


TO REQUEST A COPY OF OUR CATALOG: www.emsdiasum.com/requests/catalog


P.O. Box 550 • 1560 Industry Rd. Hatfield, Pa 19440 Tel: (215) 412-8400 Fax: (215) 412-8450


email: info@emsdiasum.com or stacie@ems-secure.com


TO VIEW OUR DIGITAL CATALOG: catalog.emsdiasum.com


Follow us on...


Specifications Dimensions


Electrical Temperature Range


Width — 11 inches (279mm) Depth — 13 inches (330mm) Height — 14 inches (356mm) 100 VAC-240 VAC, 50/60 Hz 3A +30 to -200°C


Liquid Nitrogen Consumption 1 to 2 L per hour Cryogen Volume


Ordering Information Cat. No.


Description 37000 EMS-002 Rapid Immersion Freezer


Includes Removable Drop Anvil Assembly, Stainless Steel Liquid Nitrogen Dewar, Cryogen Temperature Controller, Cryogen Holder, and Instructions. 110V-240V Environmental Chamber


Environmental Chamber Forceps Propane Transfer System Freeze Forceps


approximately 20 mL


Qty. each


each each each each


Page 1  |  Page 2  |  Page 3  |  Page 4