Suspension
Suspension and Steering
Your No.1 Motorsport Store
1 MURRAY MOTORSPORT DAMPER SERVICE CENTRE
For over 25 years Murray Motorsport have specialised in sales and servicing Profl ex dampers for race, rallycross and rally cars. In recent years they have expanded the range of damper brands available and now off er a range of products to cater for all levels of the market from clubman to professional. They are an offi cial service centre for both Profl ex & Ohlins.
In 2011 Murray Motorsport invested in a new damper dyno which enables them to off er an additional service; the fi rst of its kind at the time in Ireland. Most dampers serviced will be tested afterwards and a graph will be available for customers. Some of the basic advantages for getting your dampers tested are: • Check dampers are performing correctly
• Check the position for optimum range of adjustment settings • Match the settings of each shock (equalise the left vs. right) Springs can also tested to check their rates.
HOW THE DYNO WORKS:
A shock dynamometer (dyno) is a piece of equipment used to display how the damping force of a damper changes with shaft velocity. The shock is fi xed at one end, and attached to a vertical shaft on its opposing end. The vertical shaft is connected to a motor in such a way that as the motor turns, the shaft displaces vertically for a set distance. A load cell at the shock’s fi xed end is used to sense the amount of load on the shock and this is translated to a computer program. The motor runs through a set list of velocities, plotting how much force is being recorded at each velocity. This PSD Dyno can measure in various stroke lengths, speeds and the load cell can measure up to 16000 Newton’s.
COSTS
All prices subject to 13.5% VAT
IN - HOUSE SERVICE Profl ex Conventional (coilover) standard Shock Service €80.00 each Profl ex MacPherson 45mm standard Shock Service Profl ex MacPherson 55mm standard Shock Service Ohlins
FORCE VS. DISPLACEMENT FORCE VS. VELOCITY (all repairs can be carried out in-house). For other brands, please call.
2 ALLOY TOP MOUNT Part No.:
1150 Euro Price: €75.00 (€92.25 incl. VAT)
3 ECCENTRIC TOP MOUNT Part No.:
1170 Euro Price: €95.00 (€116.85 incl. VAT)
€90.00 each €100.00 each POA
4 GAZ TOP MOUNTS
Camber Adjuster Plates and Top Mounts. The camber angle on most cars is fi xed as standard. For racing purposes a more negative camber would be desirable, so to enable this GAZ have developed a range of adjustable camber plates to allow the angle to be altered.
The plates are made from anodised aluminium billet and come with a top bearing incorporated into the centre.
DESCRIPTION BMW E46 Camber Slider
Ford Escort Mk1 Camber Fixed Ford Focus Mk1 and Fiesta ST Mazda RX7 Camber Slider
VW Golf Camber/Castor Slider
PRICE excl. VAT €197.33 €197.33 €144.71 €197.33 €197.33
PRICE incl. VAT €242.72 €242.72 €177.99 €242.72 €242.72
5 UNIVERSAL JOINTS
Racetech universal military joints are precisely designed and manufactured to heavy duty military specifi cation (mil/j/6193) for the aerospace industry. These are suitable for use in gearbox linkages where low defl ection rates, good strength-to-weight ratio and long service life are essential.
PART NO.: DESCRIPTION RTUJ B10 RTUJ B12
Military Joint 1/2" x 1/2" Bore Military Joint 5/8" x 5/8" Bore
RTUJ B14 Military Joint 3/4" x 3/4" Bore
PRICE excl. VAT €130.00 €130.00 €130.00
PRICE incl. VAT €159.90 €159.90 €159.90
Racetech universal joint is of high quality, manufactured from high-grade alloy steel for increased durability and better performance than standard industrial-grade models. All components are heat traeted, precision machined and ground to close tolerances.
PART NO.: DESCRIPTION BMW E46 VW Golf Ford Focus and Fiesta ST PART NO.: DESCRIPTION Ford Escort Mk1 Mazda RX7 *This is just a selection of the wide range of top mounts available 6 ROD END AND SPHERICAL BEARINGS
NMB Minebea rod ends and sperical bearings are manufactured to aerospace and military specifi cation and have been used by motorsport car manufacturers for over 30 years.
The joints use a tefl on liner with very low coeffi cient of friction and resistant to high tempratures (-54c to 121c) which requires no maintenance or lubrication. Full range of available.
Please call our sale team or view
www.murraymotorsport.com for further details.
Shop Online:
www.murraymotorsport.com 113
RTUJSW10 Saddle washer to suit 1/2" x 1/2" RTUJSW12 Saddle washer to suit 5/8" x 5/8" RTUJSW14 Saddle washer to suit 3/4" x 3/4"
PRICE excl. VAT €5.00 €5.00 €5.00
PRICE incl. VAT €6.15 €6.15 €6.15
RTUJNS B10 Needle Bearing Joint 1/2" x 1/2" Bore RTUJNS B12 Needle Bearing Joint 5/8" x 5/8" Bore RTUJNS B14 Needle Bearing Joint 3/4" x 3/4" Bore
PRICE excl. VAT €162.00 €162.00 €162.00
PRICE incl. VAT €199.26 €199.26 €199.26
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145 |
Page 146 |
Page 147 |
Page 148 |
Page 149 |
Page 150 |
Page 151 |
Page 152 |
Page 153 |
Page 154 |
Page 155 |
Page 156 |
Page 157 |
Page 158 |
Page 159 |
Page 160 |
Page 161 |
Page 162 |
Page 163 |
Page 164 |
Page 165 |
Page 166 |
Page 167 |
Page 168 |
Page 169 |
Page 170 |
Page 171 |
Page 172 |
Page 173 |
Page 174 |
Page 175 |
Page 176
