NEWS


TAKING THE HEAT OUT OF INDUSTRY


T


he University of Sheffield Advanced Manufacturing Research Centre (AMRC)


has secured £1 million funding to establish HyDecarb, a first-of-its- kind, open-access research capability dedicated to the decarbonisation of industrial natural gas. Industrial heat is one of the most


significant challenges in the race to net zero, accounting for nearly one-fifth of global greenhouse gas emissions. In the UK, industrial processes contribute approximately 12 per cent of total emissions, the majority of which is heat-related. While many sectors can turn to electrification, energy-intensive industries such as foundries, glassmaking and steel face massive technical barriers where electricity is not yet a viable option. The HyDecarb project, backed by the


High Value Manufacturing (HVM) Catapult, provides a real-world, industrial-scale testbed for manufacturers to trial hydrogen fuel-switching in a controlled environment. Designed to bridge the gap between laboratory research and full-scale industrial adoption, the AMRC’s open-access infrastructure removes the technical and financial barriers that have traditionally made the transition to low-carbon energy too risky for individual manufacturers to attempt alone. Matthew Cawood, head of castings


at the AMRC, says the capability is a necessity for the survival of these sectors. “High-temperature industries have traditionally been the hardest to decarbonise, but finding a solution is now a necessity. By developing this capability at the AMRC, we are proving to our partners that they can slash emissions immediately without needing to reinvent their entire operation. “We are providing the environment


where businesses can meet environmental goals while keeping their production lines running and staying competitive. As a leading manufacturing R&D centre, our role is to de-risk this


10 / WELDING WORLD MAGAZINE - ISSUE 04 - AUGUST 2026


technology and drive its adoption across the UK manufacturing sector to meet the country’s net zero ambitions.” At the heart of the HyDecarb project


is a dual-innovation approach that mimics the exact conditions found in ageing UK factories, allowing for accurate, real-world testing: The furnace: A 20-year-old industrial


furnace will be overhauled by Therser UK and converted to operate on any blend of natural gas and hydrogen. The hydrogen source: To feed the


furnace, the AMRC will integrate a gas decarbonisation unit from Sheffield- based cleantech pioneer, Suiso, that generates a hydrogen/natural gas blend to power the furnace. Suiso’s proprietary microwave


pyrolysis technology decarbonises natural gas at the point of use by separating methane into hydrogen and solid carbon. By removing the carbon before combustion, the system enables industrial users to significantly reduce CO2


existing gas infrastructure. The carbon is captured in a solid form rather than being released as atmospheric CO2 This solid carbon is then upgraded


.


by Suiso into high-value activated carbon, used globally for water purification and air filtration. This circular approach turns a carbon liability into a commercial asset, a key factor in the


AMRC’s selection of the technology. Stuart McKnight, CEO of Suiso,


says: “We are grateful to the AMRC for its confidence in our technology and for deploying it in these operations to help drive its adoption across the industries they support over time. “This project marks a significant


milestone in the transition to cost- effective, low-carbon industrial processes. Converting emissions into value is what we do at Suiso.” Matthew Pound, Sales Director,


Therser UK, says: “Working alongside the AMRC and Suiso, we are helping to create a practical, scalable route for energy-intensive industries to reduce emissions, de-risk investment decisions and accelerate progress towards net-zero manufacturing. “By converting an existing industrial


emissions while continuing to utilise


furnace to operate on hydrogen and natural gas blends, we are demonstrating how proven manufacturing assets can be adapted rather than replaced.” The AMRC’s HyDecarb capability


reinforces Sheffield’s position as the UK’s hub for green manufacturing. By lowering the barrier to entry for hydrogen adoption and making research accessible to all, the AMRC is ensuring that the region’s manufacturing ecosystem remains at the forefront of the global race to net zero.


www.amrc.co.uk


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40