INSULATION 71
GO BEYOND THE MINIMUM ON ACOUSTICS
Rob Crampton of Hush Acoustics explains why investment in acoustic insulation will result in a higher level of satisfaction for customers.
A
coustic standards in UK house- building have not been upgraded in a meaningful way since the early
2000s. As a result, sound insulation levels in connected homes and within individual dwellings have fallen way behind the improvements seen in many other areas of building, such as thermal performance, security and accessibility. This is why it is crucial when
designing internal and separating floors/ceilings and walls to look to the acoustic standards set by the Building Regulations as an absolute minimum – not a target. Building to a standard that will simply tick the necessary boxes for Building Control sign-off will often disappoint homebuyers and tenants, who rightly expect more given the availability of today’s high performing acoustic products.
NOISE ANNOYS In fact, many of the most common complaints from buyers of new build homes relate to unwelcome noise. In individual properties such as detached family homes, it is not unusual to hear owners commenting that impact sound transmission through the house from sources even including light switches is far greater than they were expecting. Conversion of existing properties is another area where minimum acoustic standards fall short. The boom in adaptive reuse means more and more commercial spaces are being converted into residen- tial – here the requirements for material change of use should not only be complied with, but exceeded. Newly created residential properties will often be above ground floor commercial space, such as retail or hospitality, where the amount of noise generated will vary hugely – in some cases this could render the minimum standards totally inadequate. In order to exceed the minimum
acoustic standards, every project needs to be assessed on its own merit – there is no one size fits all approach. When a sound wave hits a surface, some of its energy will be reflected and
some absorbed. This causes sound vibra- tions to transmit in buildings in different ways, which is why multiple different materials have to be used to stop their transmission paths. There are many different floor/ceiling
and wall constructions used in construc- tion, each of which can be treated with a bespoke combination of acoustic products to deliver superior results. Some products are designed to absorb airborne sound, with fibrous materials particularly effective, while others work by providing separation. Resilient layers and rubber products are key to reducing impact noise and dense materials like chipboard and plasterboard provide a barrier to soundwaves. It is also important to deal with the problem of flanking – where sound waves transmit around installed insulation materials. Hence, any sound reduction measure must treat the edges and perime- ters of floors and walls with sealants and ‘flanking strips.’
MINIMUM STANDARDS Approved Document E, Northern Ireland’s Part G and Scotland’s Section 5 all stipu- late compliance levels for separating
floors and walls. In England and Wales, separating floors between new homes and purpose-built rooms for residential purposes must achieve an airborne sound insulation level of 45 dB DnT,w + Ctr. In Scotland, that figure is 56 dB DnT,w (onsite test results). In change of use or conversion, the minimum levels are 43 dB DnT,w + Ctr and 53 dB DnT,w respectively. The maximum level of impact sound
transmission in England and Wales is LnTw 62 dB (56 dB in Scotland). In rooms created by a change of use or conversion, it is LnTw 64 dB (Approved Document E) and 58 dB (Section 5) in Scotland. The separating walls between new homes in England and Wales must meet a minimum airborne sound insulation level of 45 dB DnT,w + Ctr. This figure is 43 dB DnT,w + Ctr for purpose-built rooms for residential purposes and rooms created by a change of use or conversion. Scottish properties must meet a higher
standard with separating walls between new homes, purpose-built rooms for residential purposes and conversions required to meet the minimum airborne sound insulation level. Homes or rooms created by a change of use or conversion
WWW.HBDONLINE.CO.UK
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100
