School Transportation News Magazine | Buyer’s Guide 2020 ©2019 CMA, LLC.


MICRO BIRD, INC. 3000 Girardin St. Drummondville, QC J2E 0A1 819-477-8222 Micro Bird, Inc. designs and manufactures a complete line of school buses for up to 36 passengers. Micro Bird is an innovator and leader in the Type A industry, expand- ing its selection with the G5 Electric, an efficient and affordable electric bus. Te Micro Bird product line offers a wide range of configurations intended for the school bus industry and child care mar- kets throughout North America. Products/Services: Type A School Bus, Electric Bus, Drive Train SEE OUR AD ON PAGES 19, 148.

MIDWEST TRANSIT EQUIPMENT 146 W. Issert Dr. Kankakee, IL 60901 815-933-2412 Products/Services: Engine Equipment/ Accessories, Emission Control Products, Heating & Air Conditioning Parts, Lighting Products, Maintenance Products, Safety Equipment, Bus Parts, New Bus Dealer, Used Bus Dealer, Seating Equipment

MISCO REFRACTOMETER 6275 Cochran Rd. Solon, OH 44139 440-349-1500 Products/Services: Shop Tools

MOBILE CLIMATE CONTROL 7540 Jane St. Vaughan, ON L4K 0A4 905-482-2750 Products/Services: Air Conditioning Systems, Heating Systems

MOBILE CREATE USA 2961 W. MacArthur Blvd. Ste. 210 Santa Ana, CA 92704 408-933-9588 Products/Services: Radio Systems, GPS Hardware, GPS/AVL, Vehicle Management

MODINE 1500 DeKoven Ave. Racine, WI 53403 Products/Services: Heating Systems, En- gine Equipment/Accessories, Air Condi- tioning Components

MOTOROLA SOLUTIONS 500 W. Monroe, Chicago, IL 60661 888-325-9336 Products/Services: Radio Systems

Allow to put

safety first, second, third and fourth.


We deliver peace of mind by engineering tires that deliver superior performance in challenging road conditions. Plus, our 7-year, 3-retread warranty gives you the added assurance that our TBR tires are also built to last.

Learn more at

Feel Confident Supply your staff with the

School Bus Safety Handbook: Choosing and Using Child Safety

Restraint Systems and Wheelchairs

Covering: • CSRS selection

• Proper child securement

• Usage tips

• Step-by-step installation

• Wheelchair standards

• Equipment care/ maintenance

• Evacuation • Pricing starts at just $35 • Quantity discounts • Free shipping

126 Date: 11/19/19 Client: CMA Job #: 2821

■ Space between rows Per FMVSS 222, the maximum allowable spacing

1.Considerations for CSRS: Seating Space

between rows of school bus seats is 24 inches, measured from the seating reference point, or SRP (pictured right), to the back of the seat ahead. Through testing, NHTSA has found that this is the maximum spacing that will pro- vide the benefits of compartmentalization. The minimum distance between seating rows is not specified in federal regulations, but is about 18 to 20 inches in practice. NHTSA recommends that buses used to tranport

preschoolers be ordered with maximum allowable spac- ing between all or some rows so that there is adequate room for CSRS. Track seating or other seat types that allow spacing to be adjusted, as needed, are options to consider. Note: If maximum allowable spacing is desired, it must be specified when ordering a bus. When CSRS are not considered, the default goal is to maximize the number or rows on the bus in order to maximize capacity. This makes it virtually impossible to install rear-facing CSRS or large CSRS for children with special needs.

FMVSS 222: maximum allowable spacing Height: 24” (20” pre-Oct. 21, 2009)

Depth (fore-aft):

24” SRP 11 Wondering if your bus has maximum row

spacing? Here’s how to tell: Per FMVSS 222, the maximum space allowed be-

tween rows (24 inches) is measured from a point that represents a crash dummy’s hip joint (the seating ref- erence point, or SRP, shown above). To get a rough idea of how a bus’s rows are spaced, measure hori- zontally from about 2 inches above the lower cushions from one seatback to the other. Push the end of the measuring tape into the back of the seat ahead until it hits the foam pad underneath the cover. This measure- ment will be approximately 28 inches if rows are at maximum allowed spacing (also called maximum knee spacing) and less if not (maximum capacity spacing).

To confirm any bus feature with certainty, contact the

Arrows point to incorrect use of the CSRS on the left. The close row spacing prevents the CSRS from resting on the seat cushion. The other CSRS fits properly between rows set at maximum spacing.

■ Seat cushion width NHTSA guidelines allow the use of bus seats for

multiple occupants, provided “the combined width of CSRS and/or other passengers on a single seat does not exceed the width of the seat” (NHTSA, 1999). the images (right) for guidance by CSRS type.


NHTSA says only two conven- tional CSRS fit on a seat that’s 39 inches or wider; only one fits if the seat is less than 39 inches wide.

Rear-Facing CSRS: Instrucctommodating to CSRS. (Some 12-inch aisles are wider at Reclined enough, so that gravity will help

keep the child’s head upright and his or her airway open while riding. A baby’s CSRS is too upright if the head flops forward (chin to chest). This could cause breathing difficulties.

Step 3: Angle: Set the CSRS to Be Reclined or Upright 39-inch seat

■ Aisle width A narrow aisle can make carrying a CSRS on/off the bus difficult and also hinder evacuation. A bus aisle must be at least 12 inches at its narrowest width between cushions. By equipping one side of the bus with seating that is less than 39 inches wide, the aisle can be more ac-

ions will outline how to install a rear-facing CSRS in a w y that balances: hip width because the seatbacks taper at the top.)

School Bus Safety Handbook, Third Edition • Choosing and Using CSRS and Wheelchairs

Upright enough, so force will be spread over a child’s entire back in a crash. If a CSRS is over- reclined, too much crash force will be placed on the child’s weak shoulders, which could cause injury and allow ejection from the harness.

How to tell when the appropriate angle is achieved Carefully read and follow CSRS instructions. Most CSRS must be placed

so that the child’s back reclines at a 30- to 45-degree angle from fully upright. (See illustration, below.) Look for these types of angle indicators on the CSRS:

• Level-to-ground lines. Set the CSRS so the line is parallel to the ground. The line may be on a label or molded into the plastic shell.

Look for level indicators.

• Gravity-based indicators. Various styles use such indicators as dials, air bubbles, or balls that must fall within a specified range. For this type to work properly, the bus must be on level ground.

Each of these indicator types may have instructions that allow older babies with better head control to sit more upright.

How to adjust the angle of a rear-facing CSRS If a CSRS is too reclined or (more likely) too upright, see the instructions for

approved ways to make angle adjustments. Techniques might include: • Use a recline foot. If a foot is present (usually on a RF-only CSRS’s separate base), lower it to increase recline; stow it to make the CSRS more upright.

• Use a rolled towel or piece of Styrofoam pool noodle (illustrated, at right). Place this under the front of the CSRS to prop it into a more-reclined position. (However, this method is rarely needed on a bus, due to the flat seat cushions. Never use this technique to make a CSRS more upright.)

• Further tighten the installation strap. The CSRS will become more upright. • Use a RF-only CSRS without its base. Most instructions allow this option.

Top of the CSRS hits the seatback ahead.

CSRS does not rest on the bus seat.

Rolled towel

How to deal with seating area incompatibility Sometimes a CSRS is too upright because the space between rows does not

allow it to rest on the seat cushion (illustration, left). Try these potential solutions: • Use a RF-only CSRS without its base. Most instructions allow this option, which tends to require less fore-aft space.

• Move the CSRS handle to upright. If the handle of a RF-only CSRS is inter- acting with the seatback, see if instructions allow a different handle postion.

• Install the CSRS in a different row. Some rows may have wider spacing. If the front seat barrier is upright, there will be more space in the front row.

• Use a different CSRS. Some models are shorter, so they require less space.

Forward-Facing CSRS: Most forward-facing CSRS types must be used in an upright position. However, when a convertible CSRS is used forward facing, confirm that the angle has been properly adjusted for use in that mode. Follow instructions; never place padding under a forward-facing CSRS to adjust the angle.

Some forward-facing CSRS may be used upright or in a semi-reclined position. However, unless there is a valid

reason for the child to be reclined, on a school bus it is better to install a convertible CSRS in its upright position, as that is more likely to leave space for the child’s legs.

What would you do?

A forward-facing convertible CSRS overhangs the seat cushion and presses against the seatback ahead. What can you check/adjust to try to fix this problem?

School Bus Safety Handbook, Third Edition • Choosing and Using CSRS and Wheelchairs 49

A 30° angle may be enough recline for many RF toddlers.

0° 45° 30°

More recline is needed (up to 45°), for young babies.


Three CSRS that attach us- ing cam wraps can usually fit on one bus seat that is 39 inches wide or more.

Aisle width affects CSRS ease of use and evacuation 39-inch seat

12-inch aisle

30-inch seat 21-inch aisle 11 39-inch seat

manufacturer, and provide the bus’s vehicle identification number (VIN).



Step 4:Protect the Wheelchair-Seated Occupant Whenever possible, transfer a child who uses a WC to

bus seating (with a CSRS, as needed), following the in- structions in his/her ITP. (See page 83.) However, if circum- stances require a child to ride in a WC during transport, it is essential that he/she wears an occupant restraint system.

Occupant Restraint System Types There are three types of crashworthy occupant

restraint systems for WC occupants: 1. A lap-shoulder seat belt, provided as part of a WTORS system. (An independent system.)

2. A load-bearing WC lap belt (marked with the logo shown on page 84) used with a WTORS shoulder belt connected to the school bus wall. (A partially integrated system.)

3. A load-bearing five-point harness for children who weigh 25 to 50 pounds, marked with the logo shown on page 84. (A fully integrated system, which, if present, should fit as described on page 62.)

The most common type, by far, is the first type de-

scribed above: the independent system that is part of a WTORS. As described on page 84, current WC19-com- pliant wheelchairs must have the option to be equipped with partially or fully integrated systems, but few WCs are actually equipped with this transit option. There- fore, even with WC19 wheelchairs, expect to use the full WTORS lap-shoulder seat belt unless absolutely certain that the integrated belts are marked as crashworthy.

Wheelchair Seat Belt Fit Lap-shoulder belts for WC occupants come in a vari-

Using a Cam Wrap to Anchor Safety Vests The type of cam wrap used for anchoring a safety

vest is often called a “seat mount” or “portable seat mount” by manufacturers. It is a separate device with hardware that connects to rings, loops, or slots on a vest. The connection to the vest, at shoulders and hips, is made while the child wears the vest, which has already been adjusted for proper fit (usually while off the bus). (See Chapter 5 for vest fit details.)


A slight indentation in the top of the seatback is caused by a cam strap that is properly tightened.

ety of styles, as described on page 81. Follow manufac- turer instructions for the particular system being used. Regardless of the style, strive to make the belt fit the way any other seat belt should. (See images, right, and pages 68–69.) The webbing should be flat and make snug con- tact with the body. The lap portion should cross the up- per thighs, and the shoulder portion should contact the occupant as it crosses the center of the collarbone and run diagonally across the torso. The shoulder belt should not hover away from the body nor contact the neck or throat area. The lap belt should not sit above the thighs, crossing the child’s abdomen.

Shoulder connector straps usually have adjusters, whereas hip straps don’t. (Tip: Use this detail to determine which end of a

The system may be fully or partially integrated into the WC, but typically a seat belt that is part of a WTORS must be added. It is the responsibility of transporters to ensure that a crashworthy occupant restraint system is used properly on each ride, as described on this page.

Children who ride the bus while seated in a WC are not protected by compartmentalization. A WC-seated passenger must use a seat belt, even if other passengers do not.

The shoulder belt crosses the center of the collarbone and rests against the chest.

The lap belt crosses the tops of the thighs, not higher. The shoulder belt connects to the lap belt at the child’s hip (aisle side).

Above: Good belt fit.

Proper positioning of the lap

and shoulder belt is critical for protection. This shoulder belt properly crosses the center of the shoulder and diagonally across the torso. The lap belt is snug and low on the top of the thighs.

Follow the basic anchoring process outlined on the

previous page. Make sure that the attachment points can be connected to the vest while the child is seated properly, with his/her back against the seatback. Adjust the seat mount’s hip and shoulder straps so that they connect to the vest in a way that holds the child securely in place (no slack), while not altering proper vest fit.

tion, which would require repositioning and retightening the tiedowns. This type of trial and error should be done during a practice run-through before the child’s first ride.

For instance, it may help to move the wheelchair’s posi- connected to the seated child. Remove all

of earlier steps to make the lap-shoulder belt fit co connectors can be adjusted, as needed, once

slack, but do not overtighten, as that can pull the vest and child up off the seat cushion.


Release buttons on buckles usually face inward, toward the seatback.

School Bus Safety Handbook, Third Edition

Seat bight Note: Strap portions shown in black are in front of the bight; the ones in grey are behind it.

Although protecting the occupant with the lap-shoul- der belt is the last step in the process of safely transport- ing a child in a WC, it may be nec ssary to redo the work seat mount should go upward.) The shourlderrectly.

Below: Poor belt fit. There are many problems with the fit of this belt system. The lap belt rides up on the abdomen, and the shoulder belt does not contact the chest. These issues are worsened by an unfortunate lap-shoulder belt design, in which the shoulder belt connects to the lap belt in the middle of the child’s lap, so the shoulder belt does not run across the entire torso and tends to pull the lap belt upward.

The angle of this shoulder belt is too steep; the belt does not make contact with the shoulder. This fit could be improved by adjusting the WC position or moving the shoulder belt’s anchor point back- ward on the bus wall.

The lap belt rides above the thighs. It should be pushed downward and made snug. Do not allow the shoulder belt to pull the lap belt upward when snugged.

The shoulder belt connects to the middle of the lap belt, so it does not fully cross the torso. Using a better designed seat belt is the only remedy for this issue (see page 81).

• Choosing and Using CSRS and Wheelchairs 4 Image courtesy of Besi, Inc.

Hip connector straps usually do not have adjusters. Since they are attached to the cam wrap at a fixed length, the amount that ex- tends from the seat bight adjusts by sliding the cam wrap around the seatback. See below for im- portant information about how to determine the correct length of these straps.

Too long Better length

The hip connector straps attach to the child’s safety vest and should hold the child’s hips firmly against the lower seatback. A common mistake is to leave the hip connector straps too long (left), which allows the straps to be slack when attached to the vest. For most children, only about an inch or two of webbing extending from the seat bight is needed, as further explained at right. Set the length during the cam wrap anchoring process, described above.

School Bus Safety Handbook, Third Edition

Hip and shoulder con- nector straps must align with a properly worn safety vest. Since the bot- tom of the vest must touch the top of the seated child’s thighs (never higher), the hip connector strap must be rather short—just long enough to reach the attachment hardware on the safety vest. Attach and adjust the shoulder straps last. (See Chapter 5 for more on vest fit.)

What would you do?

A preschooler who wears a safety vest is able to slide for- ward on the seat cushion several inches. How can you fix this positioning problem?

• Choosing and Using CSRS and Wheelchairs 57 Shoulder attachment hardware


attachment hardware

Back of vest shown. Image courtesy Besi, Inc.


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116  |  Page 117  |  Page 118  |  Page 119  |  Page 120  |  Page 121  |  Page 122  |  Page 123  |  Page 124  |  Page 125  |  Page 126  |  Page 127  |  Page 128  |  Page 129  |  Page 130  |  Page 131  |  Page 132  |  Page 133  |  Page 134  |  Page 135  |  Page 136  |  Page 137  |  Page 138  |  Page 139  |  Page 140  |  Page 141  |  Page 142  |  Page 143  |  Page 144  |  Page 145  |  Page 146  |  Page 147  |  Page 148