WORKING AT HEIGHT FACT OR FICTION?
To raise awareness of the risks surrounding working from height and encourage safe working practices, safety experts at Horizon Platforms share some common myths to debunk.
Working from height is one of the most dangerous activities that can be undertaken in a profession, and it is the leading cause of workplace fatality. According to statistics from the Health & Safety Executive (HSE), 25% of deaths in the construction industry happened by falls from roofs and 586,000 working days were lost to non-fatal injury by falls from height at work during the period from 2022 to 2023.
Despite this, there are commonly believed misconceptions which are putting worker’s safety and lives at risk in the workplace.
I DON’T NEED PROTECTION WHEN WORKING AT A LOW HEIGHT
Some workers may feel the risk is lessened at a lower height and therefore they do not need to take the same precautions with protective equipment or clothing. This is a dangerous mindset which could potentially lead to serious injury at work, should an accident occur. No matter how low the height, there is always an element of risk for workers. Falls from relatively low heights can still pose a serious risk to a worker's health.
I DON’T NEED PPE FOR QUICK TASKS AT HEIGHT The same advice applies for quick tasks, no matter what height this is at. Just one small mistake, such as a slip, could lead to fatalities so is not worth the risk. Personal protective equipment could include clothing items like harnesses to secure workers at height, it may also include working equipment such as guardrails, anchors and hooks. In some cases, machinery may be required such as powered access equipment.
I MUST BE QUALIFIED TO USE A LADDER This is a common myth believed by many workers, but in a way is welcome and the right mindset. Whilst there is no formal qualification requirement for using a ladder, safety guidance does outline that businesses
18
must be confident that the worker is competent and has the necessary knowledge to ensure safe usage of ladders at work.
YOU DON’T NEED TO CHECK EQUIPMENT IF IT HAS BEEN CHECKED ONCE BEFORE
This is a common mistake made within businesses, they think because equipment has been previously inspected it must be ok for use. The issue is, over time many things may have changed since the last inspection which could change the outcome of using the equipment. All equipment, whether clothing or tools, should be checked before each use. You will not know if items have degraded over time or been damaged without your knowledge.
I CAN SAVE MONEY BY NOT PURCHASING PPE FOR WORKING AT HEIGHTS
Businesses may think they are saving money not buying extra protective equipment but should a worker suffer an accident they will be liable for a potentially large sum if the accident leads to legal action, prison time may be a possibility also. Compensation, fines and loss of earnings due to long-term ill health can all be expensive outcomes caused by a failure to meet safety standards for working at height.
I AM NOT RESPONSIBLE FOR PROTECTING EXTERNAL CONTRACTORS ONSITE
Employers are responsible for carrying out risk assessment and providing safe working environments for contractors. The contractors themselves additionally have a responsibility to follow proper protocol and ensure their competency when working at height. It is a common misconception that if you hire an external contractor, you are not liable for health and safety accidents or incidents but this is not the case.
www.horizonplatforms.co.uk/blog/working-height-myths www.tomorrowshs.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42
