search.noResults

search.searching

dataCollection.invalidEmail
note.createNoteMessage

search.noResults

search.searching

orderForm.title

orderForm.productCode
orderForm.description
orderForm.quantity
orderForm.itemPrice
orderForm.price
orderForm.totalPrice
orderForm.deliveryDetails.billingAddress
orderForm.deliveryDetails.deliveryAddress
orderForm.noItems
New Venture, New Volvos for H & H Waste Management


H & H Waste Management Ltd, part of the Hoban Group, has taken delivery of a Volvo L180H and an EW240E material handler for its recently acquired waste handling facility located at Aylesbury, Buckinghamshire.


Both machines are the first Volvos to be purchased by the company to handle a range of material from residual (black bin waste), through to wood, industrial waste, concrete and rubble. The new 28-tonne loading shovel has been fitted with a heavy-duty 4.8m³ hi-tip bucket supplied by Ulrich attachments, together with 26.5R25 solid wheel and tyre assemblies to counter general wear working on the concrete pad. The EW240E MHE was ordered following a successful demonstration and evaluation by H & H Waste Management at the Aylesbury facility. “We opted for the Volvo shovel as we consider it to be the best on the market in terms of productivity, reliability and ultimately, its residual value,” explains Managing Director, Michael Hoban. “The material handler accomplished all the activities required of it while on demonstration and the two machines complement each other well.” H & H Waste Management’s newly acquired MRF receives


waste from London, Buckinghamshire and Oxfordshire, the majority of which is hauled by Hoban Ltd’s fleet of forty walking floor bulk trailers. ■


SPECIFICATIONS:


L180H LOADING SHOVEL ● ENGINE: 13-litre stage-IV final engine developing 333hp in a relatively low rpm range of between 1,300 and 1,400 rpm


● Volvo manufactured driveline components include:


● Volvo Eco-pedal, which encourages the operator to run the machine at its optimum rpm in the engine’s torque curve and its speed has been restricted to a maximum of 20mph


EW240E MATERIAL HANDLER


● ENGINE: Six-cylinder Volvo engine developing 171 nett hp


● Pump flow is controlled for combined equipment and slewing operations to reduce the flow loss through the overload relief valves, whilst maintaining lift capacity and maximum swing torque


● Hydraulically raised and lowered cab with a maximum elevation of 5.7 metres


H&H WASTE MANAGEMENT SPECIFICATION ● 6.5m straight boom ● 4m sorting arm ● Dehaco 800L selector grab


Thus rigged, the EW240E Material Handler provides: ● Maximum forward reach of 10 metres


“We opted for the Volvo shovel as we consider it to be the best on the market in terms of productivity, reliability and ultimately, its residual value.”


28 THE VOICE MAGAZINE No35 2019


● Maximum height of 12 metres measured at the attachment pin


● 3.7 tonnes lifting capacity at maximum reach across carriage with its outriggers down


● To facilitate grab rotation, the machine is equipped with x3 hydraulics along with x1 hammer/shear hydraulics and hose rupture valves fitted as standard


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48