Nuclear Power
COMPLEX PROBLEM Creative solution for
Nuclear facility benefi ts from using a composite insert bonded into a pipe to fi x its severe corrosion issue
C
omposite repairs and wrap systems are not necessarily a hot topic any more, with many standards, procedures and case studies available on
the subject. However, every so often we still come across a story of a simple wrap being used as an ingredient for an unorthodox, well-engineered repair solution. In 2017, a nuclear power station
in France identifi ed a problem at the bottom of a sump pit of its cooling water system. T e 200mm ID suction pipe protruding from a concrete wall was experiencing severe corrosion. An externally applied repair was not feasible as corrosion extended well beyond the area encapsulated in concrete. To make matters worse, the fl ange connecting the pipe to the drain pump was also badly corroded. Belzona’s distributor in western France, Alliatech, used its experience serving the French market to come up with a unique solution. T is solution was designed to solve the problem and prevent any further corrosion for the long term.
When external repair is not an option A cut-and-weld technique would have caused needless downtime and the extent of metal degradation called for more than a
A composite insert was bonded into the pipe
protective lining. For minimum downtime and fast return to service, a repair had to be completed from the inside of the pipe. A durable 500mm long ‘composite insert’ was created using the Belzona SuperWrap II system and a plastic former. When it came to creating and consolidating the composite insert, a familiar application procedure was adhered to. T e procedure followed some of the steps taken for a regular pipe wrap: wetting out the reinforcement sheet with resin; applying the sheet onto the former with 50% overlap; and consolidating the wrap using the release fi lm provided. T e composite insert was created complete with a new fl ange, 70mm wide and 10mm thick. Once the sleeve was cured and former removed, it was sanded with holes drilled to match those of the original fl ange.
A view of the sump 48
www.engineerlive.com
Composite insert T e next step was to bond the insert into the pipe. After grit blasting, Belzona 1161, a
surface-tolerant paste-grade material, was used as an adhesive between the sleeve and the pipe, at a maximum thickness of 10mm. Finally, to ensure lasting erosion-
corrosion protection, Belzona 1321 (Ceramic S-Metal), a 100% solids ceramic protective coating was applied on the inside, outside and around the pipe to prevent any issues from reoccurring.
The future of composite repairs It is amazing how many problems can be solved with tried-and-tested repair materials. Particularly these days, with a focus on restoring rather than replacing, reducing downtime to a minimum and optimising operating effi ciency. Solutions that can adapt to the ever-changing challenges are the future of industrial maintenance. ●
For more information visit
www.belzona.co.uk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52
