RENEWABLE ENERGY
H
ydrogen can be used as a seasonal intermediate storage and is considered one of the solutions for a sustainable energy supply. However,
hydrogen behaves quite differently from the natural gas that the gas grid was built for, which mainly consists of methane. Te admixture of hydrogen to the gas grid leads to some challenges that need to be overcome. To understand the changed behaviour of the gas grid, cost-efficient correlative measurement methods can make an important contribution. When hydrogen is injected into the natural gas grid, often referred to as hydrogen blending, hydrogen gas is mixed with the existing natural gas in the pipeline infrastructure. Tis is done with the aim of reducing carbon emissions and making the transition to a more sustainable energy system, while making use of the existing infrastructure. Current hydrogen blends are typically in the range of 2 to 30% hydrogen by volume, which is expected to increase in the future.
Te challenge is that natural gas pipelines and infrastructure were designed for methane, not hydrogen and the technology installed is not always suitable. Furthermore, the issue of hydrogen compatibility goes beyond the pipeline network. Te thermophysical properties of hydrogen are considerably different to those of natural gas, which makes it important to determine the hydrogen content to optimise the safety and performance of combustion processes. Furthermore, to ensure fairness, billing of gas use should be shifted from volumetric metering to metering based on gas energy content, due to the considerably lower volumetric energy content of hydrogen and the potential variability of hydrogen content within the distribution networks themselves. Tankfully, the differences in thermophysical properties makes detecting hydrogen concentrations in natural gas relatively simple, assuming suitable physical parameters are monitored. Sensors that measure thermal conductivity (λ), heat capacity (cp), thermal diffusivity (α) or density (ρ) of a gas mixture are well suited to determine hydrogen concentrations, as these properties vary by as much as a factor of ~6 to 9 for hydrogen compared to a H-type natural gas. For blending applications in which the composition of the natural gas is known, then the measurement of only one of these gas parameters is sufficient to determine the
34
www.engineerlive.com THE IDEAL BLEND
Florian Krischker & Bradley Visser discuss correlative determination of blended hydrogen in natural gas
hydrogen content to high accuracy. Gas quality instrumentation based only on thermal conductivity measurements, such as the gasQS static, is particularly popular for the determination of hydrogen concentration as the underlying sensors are fast, robust, reliable and do not require a defined gas flow. In situations where the natural gas quality is unknown or is dominated by local sources (biogas plants, etc.) with temporal variability, then the measurement of a single gas parameter is insufficient to accurately determine hydrogen content. Correlative measuring instruments such as the gasQS flonic can determine hydrogen content of complex and variable gas mixtures by measuring the thermal conductivity, heat capacity and density of the gas. In the ongoing H2 MiX project up to 20 volume % of hydrogen has been blended into the L-gas network in two districts close to Cologne. Te local energy supplier GVG Rhein-Erft and the network operator Rheinische
NETZGesellschaft are supplying the hydrogen-natural gas mixture to heat both private households and businesses. TÜV Rheinland is responsible for the technical monitoring of the project. To measure the hydrogen content at different locations in the grid, several dozen gasQS static and flonics were installed in the network and linked together via GSM. In conclusion, hydrogen blending in the natural gas grid represents a promising step toward a more sustainable energy future. While it comes with its share of challenges, including pipeline compatibility, safety concerns, and equipment adaptation, these hurdles are being addressed through innovative technologies and collaborative projects. With solutions such as the gasQS instruments, hydrogen blending can be approached in a safe and fair way.
Florian Krischker & Bradley Visser are with Mems.
www.mems.ch
Example of a remote installation powered by a solar system with a
gasQS flonic for monitoring the natural gas and hydrogen admixture
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52
