MATERIALS HANDLING
T TECH
he France-headquartered company RVA, which specialises in the recovery of salt slag, a by-product of aluminium smelting, is leveraging
the benefits of several Bredel hose pumps from Watson-Marlow Fluid Technology Group (WMFTG). A number of the pumps are used to transport an abrasive oxide slurry comprising a mix of liquid and solids, which is also high in temperature. However, due to the superior operating principle of these hose pumps, along with their robust design, reliability is assured. In the aluminium refining process, scrap is melted in rotary or reverberating furnaces under a bath of molten salt that floats on the metal surface. Molten aluminium and its salt cover are then tapped from the rotary drum surface. Te final salt mix tapped from the furnace contains residual aluminium metal (around 5%) and various metal oxides, mainly aluminium oxide. Tis mixture solidifies in pans to become what is termed ‘salt slag’.
HAZARDOUS WASTE Salt slag is a hazardous waste that must be disposed of under controlled conditions. Historically, in Europe, aluminium salt slag was landfilled, but a combination of tighter environmental regulations and high landfill costs has ended this practice. Instead, the slag is recycled in dedicated plants such as the one operated by RVA. Reprocessing is recognised across the EU as the best practicable environmental option for salt slag. RVA, which is located between Reims and Metz in northeast France, uses reprocessing technology that converts the slag from a waste stream to a source of essential raw materials. Te plant is the only one of its type in the country. Importantly, RVA’s slag recycling
operation relies on a closed-loop process that makes minimal demands on the environment: there is no solid waste; water used for washing is recirculated; gaseous
46
www.engineerlive.com
TOUGH TRANSFER
How durable hose pumps are successfully transferring abrasive slurry 24/7 at an aluminium salt slag recovery plant
emissions are incinerated to harmless residues; and ammonia gas is neutralised by dedicated scrubbers. A proprietary computerised control system monitors the production process to ensure that key variables remain within pre-defined limits, while outputs meet stringent specifications.
FOUR-STAGE PROCESS Te process comprises four stages, two of which employ Bredel hose pumps in the transfer of abrasive fluids. Firstly, salt slag is milled with optional recirculation to liberate aluminium using an eddy current separator, and iron via a magnet. Fine particulate from the mill plant is then removed by a de-duster device. Next, the remaining salty material is
introduced to a dissolution section where it is mixed with water (recovered later in the process). Tis brine-laden water is transferred by two high-flow Bredel 100 pumps into pressurised reaction vessels, before Bredel 65 and 40 pumps transfer aluminium oxide as a slurry to the reactors. Tis aluminium oxide is very abrasive and, at this stage, high in temperature. Gaseous
reactants are produced, including hydrogen, methane and ammonia, which are incinerated and exhausted from the stack. Energy from the waste gases is recovered for use in other parts of the process. Tirdly, residue from the reaction phase
is conveyed to a belt filter. Here, brine and water are pumped out under vacuum using a Bredel 80, leaving a solid residue known as Valoxy. Clean water (along with water removed at the dissolution stage) is used to wash the solids. In the final stage, the effluent brine continues to the crystallisation section. Sodium chloride and potassium chloride are crystallised out of solution, initially separately and then in combination, to bring the salt mixture to the required specification. An in-line decanter increases the concentration of solids in the slurry, facilitating higher salt recovery. Te final salt mixture is conveyed to storage bays for onward shipment.
ESSENTIAL SERVICE RVA processes 110,000 tonnes of salt slag residue every year. Tis service is essential to sustainable environmental management, ensuring that salt slag, which otherwise would be transported great distances for disposal, is converted into three useful products (with zero solid waste). Both the recovered aluminium granules/powders and salt are returned to the customer’s production process, while the third product, Valoxy, is a proprietary alumina- rich substance that can be used as an alternative to alumina and bauxite in applications such as cements, binders and bricks.
A number of Bredel hose pumps transport the slurry
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68
