SPECIALIST EQUIPMENT
ENGINEEXPERTISE S
Engine replacement maximises mining vessel uptime
ince 2002, diamond mining operations in Namibia have taken place in larger volume offshore than onshore, as gemstones washed into the Atlantic
Ocean over millions of years are dredged and processed. It’s an expanding market, generating over a hundred million carats annually, so it’s important that mining vessel availability remains high. So, when as part of routine maintenance operations the Debmar Pacific mining vessel required removal and replacement of two engines, De Beers turned to ALE to ensure a swift and efficient job. As time in port at Cape Town was limited to just a few weeks, several other similar procedures were taking place at the same time, meaning this work had to take place under strict space limitations. Prior to the lift operation ALE installed two custom-designed gantries on either side of the vessel, parallel with the floor of its engine rooms. Tese gantries were enlarged at the client’s request, to provide better access to the engines.
ENGINES JACKED-UP One by one, each engine was then jacked-up to a height of approximately 1m, using four 60t jacks. A medium skid track measuring 25m was then laid, from a position underneath the engine to the custom-designed gantry at the vessel’s exterior.
Each 38t GE engine was then skidded the length of this track, where it was uplifted using a 400t crawler crane and set down in
Each engine was skidded then uplifted Custom gantries provided access
a nearby storage area. Tis procedure was completed in reverse in order to install both 80t Wartsilla engines.
ALE needed to liaise with several onsite authorities and contractors during the project, in particular during the construction of both access gantries. Having executed a large number of vessel upgrade procedures in the past, ALE was well-placed to advise on the lift procedure that would deliver the best value whilst upholding the highest standards of safety.
Te Debmar Pacific was built in 1977 and
converted into a mining vessel during 1997. It will return to active service mining gemstones 24 hours a day, 365 days per year, once all maintenance operations on it are complete.
EXPERTS IN EQUIPMENT As mining facilities are built in increasingly remote locations, operators must be prepared to transport modules at short notice across the most inhospitable of terrains. Once on-site, equipment needs to be brought up-and-running as quickly as possible to maximise its productivity.
36
www.engineerlive.com
Whether it’s relocating heavy mining equipment on existing sites or across continents, ALE allows heavy components to be moved swiftly and efficiently. Tis activity supports modular construction; as equipment can be manufactured remotely and brought to site. For existing mines, the firm’s SPMTs, lifting, jacking and skidding capabilities enable it to move fully assembled equipment rather than dismantling it. Its cross-sector experience allows it to assist with on-site construction projects, such as roof lifts, module replacement or the laying of large pipework.
Te company can also deliver equipment
to site from ports – again transporting items whole and positioning them exactly where they are required. Tis helps its customers to save valuable set-up time. Te firm’s broad experience in mining equipment transportation and lifting, specialist engineering expertise, seamless logistics service and swift deployment helps its customers to achieve the highest possible output from every location.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56
