Advertising Feature
Adveco L70 ASHP For Hot Water With 70% Less CO²
• 90 kW maximum output for hybrid domestic hot water and heating • Specifically designed for the UK climate (-20°C to +35°C) • Reduce CO² by as much as 70% compared to gas-fired systems
Commercial hot water and heating specialist Adveco extends its range of commercial air source heat pumps (ASHP) with the introduction of the Adveco L70. This high-capacity air-to-water monobloc heat pump is designed for the UK climate providing hybrid domestic hot water (DHW) and heating.
Bill Sinclair, technical director, Adveco said, “In conjunction with Adveco’s bespoke application design, the L70 offers a comprehensive response for sustainable heating and hot water, providing high-efficiency, low-emission, low cost to operate systems for the life of a commercial building.”
Rated 70kW for typical UK operation at 5°C but climbing to a maximum 90 kW from a single compact unit, and with a seasonal coefficient of performance (SCOP) as high as 4.08 the L70 is perfect for large scale commercial applications and can operate as part of a cascade installation for projects demanding greater capacity. The L70’s dual compressor configuration allows for staged start-up to limit current draw and gives the flexibility to drop to half output under low load conditions.
With ASHPs offering greater efficiencies in low-temperature systems, the high-temperature demands of commercial DHW applications can be a challenge. Achieving working flow temperatures up to 60°C, the L70 supplies preheat for hybrid applications composed of combinations of plate heat exchangers, buffer vessel, with calorifiers, gas-fired boilers or direct-electric water heating providing essential additional heat to meet commercial requirements.
The L70 will dramatically lower CO² when analysed using the carbon intensity figures from the new SAP10. Compared to gas-fired systems the carbon emissions are reduced by around 70%, when using the SCOP of 3.47 measured at 55°C flow temperature (Ecodesign warm European temperature zone with a reference design temperature of 2°C).
The L70 remains eligible for applications for the non-domestic Renewable Heat Incentive (RHI) until March 2021 and is ideal for projects applying to the Government’s Public Sector Decarbonisation Fund to drive energy efficiency.
Additional information
• Dual refrigerant circuits with smart control and built-in remote monitoring system • COP 3.65 (7°C ambient) to 2.83 (-10°C ambient) at 35°C water temperature. • Maximum working temperature/ambient air -20°C to +35°C • Automatic reverse cycle for built-in frost protection
• Maximum working temperature range /waterside 25 to 60°C • Noise level 51.6 dB(A) (sound pressure at 10m) • W2180mm H2100mm D1070mm • Dry mass 900kg
For more details visit:
www.adveco.co 34 fmuk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44
