MOVEMENTS, MAINS SYNCHRONOUS Star Wheels
MOVEMENTS, MAINS SYNCHRONOUS
Mains Synchronous
• Additional minute shaft collet: Ø6.00mm (Included but also available separately)
• Please be aware there are no direct replacement hands available for these movements
Dimensions: • Head diameter Ø65mm • Head thickness 25mm • Base 25 x 35 x 20mm
Specification: • 35mm Shaft (Maximum dial thickness 20mm)
Code M7815 Regula Star Wheels
• Regula 25, all pendulum lengths = (1) • Regula 25 with dancers, all pendulum lengths = (1) • Regula 34, all pendulum lengths = (1) • Regula 34 with dancers, all pendulum lengths = (1) • Regula 34 with dancers & brass band, all pendulum lengths = (1)
• Regula 71, all pendulum lengths = (2) • Regula 72, all pendulum lengths = (2) • Regula 72 with dancers no music, all pendulum lengths = (2)
• Regula 72 with dancers & with music, all pendulum lengths = (2)
Code
R50444 R50445
Description
(1) Regula 25.10.086.000.00 (2) Regula 35.10.086.000.00
UOM Price EACH
EACH Price breaks available, see website Tripping Gears
Regula Tripping Gears • Regula 25, all pendulum lengths = (1)
• Regula 25 with dancers, all pendulum lengths = (1)
• Regula 34, all pendulum lengths = (1)
• Regula 34 with dancers, all pendulum lengths = (1) • Regula 34 with dancers & brass band, all pendulum lengths = (1)
• Regula 71, all pendulum lengths = (1) • Regula 72, all pendulum lengths = (1) • Regula 72 with dancers no music, all pendulum lengths = (1)
• Regula 72 with dancers & with music, all pendulum lengths = (1)
Code R49638 Description
(1) Regula 25.10.069.000 Tripping Gear
UOM Price EACH £2.25
£4.95 £4.95
M46178 M46179 M49300 M46254
Synchronous Mains Clock Movements - Regular
• Regular Version • 230/240v 50Hz Self Starting • Integral Hanger, Back Setting Knob • Fittings included (replacement dial nut available M49300)
• No direct replacement centre seconds hand available • Suitable for outdoor use • Hand adjustment knob either to the rear or to the side
• CE certified
Specification: • 15mm Shaft (Maximum dial thickness 4mm) - • 23mm Shaft (Maximum dial thickness 11mm) • Hour wheel collet: Ø5.00mm (approx) • Minute Wheel collet: 3.50 x 2.80mm (approx) • Centre seconds thread: Ø1.40mm
Dimensions: • Head diameter Ø65mm • Head thickness 25mm • Base 25 x 35 x 20mm
N.B. If replacement hands are required, Euroshaft hour & minute hands are the closest fit & may need
adapting. Code
M7813 M54109 M7814 M54110 Description
15mm Shaft Movement, Rear Hand Adjustment
15mm Shaft Movement, Side Hand Adjustment
23mm Shaft Movement, Rear Hand Adjustment
23mm Shaft Movement, Side Hand Adjustment
UOM Price EACH £40.95 EACH £45.95 EACH £40.95 EACH £45.95 Price breaks available, see website Mains Synchronous, Hi Torque Pegwood
Synchronous Mains Clock Movements - Hi Torque
Synchronous Mains Clock Movement Re-synchroniser
• Hi Torque Version • Will carry heavier type counter balanced hands
• 230/240v 50Hz Self Starting • Integral Hanger, Side Setting • Fittings included (excludes adjusting shaft)
• Hour & Minute fittings (Non seconds)
• Includes special minute & hour collets for adapting original hands or new hands
• Suitable for outdoor use • CE certified
See Page 1275 1462
Hand Fitting dimensions: • Hour Shaft: Ø6.40mm • Minute Shaft: Ø4.50mm • Additional hour shaft collet: Ø8.00mm (Included but also available separately)
COUSINS TRADE SUPPLIER
• Automatically restarts the clock at the correct time after power failures
• Automatically stops and restarts the clock for daylight saving time adjustment
• Will work with mains synchronous movements, including the ones available from Cousins
• 12 and 24 hour mode • LED status lights • Can control multiple clocks • Easy to use single press start button operation at real time during installation
• Dedicated error free cabling and plugs • Easy to follow instructions • Requires 230v mains power • CE marked
Mains Synchronous Re-synchroniser Description
Ø6.00mm Collet Ø8.00mm Collet Dial Nut
UOM Price Grub Screw for Collet
35mm Shaft Movement, Hi Torque EACH £54.95 £2.95 £2.95 £1.95 £1.75
EACH EACH EACH EACH
Price breaks available, see website Mains Synchronous, Adjusting Shaft
Synchronous Mains Clock Movement Adjusting Shaft - Hi Torque
• Brass • Overall length 150mm • Knurlled plastic knob
For use with synchronous mains movement M7815 Code
M7816
Description Adjusting Shaft
Price breaks available, see website
UOM Price EACH
£7.50
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76
