72 PROJECT MAKING ACCESSORIES
CSCBARR4 Specifications Body Weight
Standard Thread Body Diameter
8 lbs
1-1/2" x 8tpi 4-1/2"
Jumbo Jaws (External Grip)* 4" to 10" Woodworm Screw Chuck Holds Round/Square Stock
Included Yes
* Sold Separately #3 WIDE JAWS PIN JAWS #2 ROUND JAWS (pre-mounted)
Barracuda4 Powergrip Key Chuck 9-piece heavy-duty lathe chuck system for large lathes Good for full size lathes of 1-1/2 HP or more
Use on lathes with 10" swings and larger - use it for your heaviest and largest turnings. Its geared key mechanism provides a powerful grip capable of holding large diameter
work.The “T”handled key allows
single hand tightening with a long shaft that clears larger diameter work. The Barracuda4 Powergrip Chuck comes with many extras including; #1 step jaws, #2 round jaws (pre- mounted), #3 round jaws, pin jaws, a screw chuck, long shaft chuck key, a “T” handled allen wrench and a wooden carrying case. The chuck comes standard with a 1-1/2" x 8 tpi mount. Headstock adapters are available for other lathes.Weight is 8lbs with a large 4-1/2" diameter chuck body.
JUMBO FLAT JAWS (not included)
CSCBARR4 Barracuda4 System with 1-1/2" x 8tpi thread
..................UPS $11, $ XCSCBARR4 Barracuda4 Chuck Body (no jaws included)
..................UPS $10, $
#1 STEP JAWS SCREW CHUCK
SPINDLE ADAPTER (not included)
LABAR418 Spindle Adapter to 1" x 8tpi..............................$ Headstock Spindle Converters to headstock to chuck Convert your
spindle so that you can use chucks with different thread sizes.
L5818
........Shopsmith™ 5/8" 1" x 8tpi* ....$ LA11418 ....1-1/4" x 8tpi..........1" x 8tpi ......$ LA341018 ..3/4" x 10tpi ..........1" x 8tpi ......$ LAG1218....1" x 12tpi ..............1" x 8tpi ......$ LA3318 ......M33 x 3.5tpi ..........1" x 8tpi ......$ *includes set screw
Face Plates CF6 6" face plate (1" x 8tpi) ..........$ CF4J 4" face plate (1" x 8tpi) ..........$ CF4 4" face plate (3/4" x 16tpi) ....$ CF3J 3" face plate (1" x 8tpi) ..........$ CF3 3" face plate (3/4" x 16tpi) ....$ CF2J 2" face plate (1" x 8tpi) ..........$ CF2 2" face plate (3/4" x 16tpi) ....$
*Aluminum
16.95 19.95 16.95 24.95 19.95
14.95
199.95 189.95
Jumbo Flat Jaws for Barracuda4 - Ideal for finishing the bottom of bowls. Includes 8 rubber grips. Opens to grip bowls from 4" to 10" internally (This is not a “C” series chuck). Compatible with lathes with 12" swings and larger.
BARR4FJ3
............................................................................................UPS $10, $ 4 sets of jaws included
From To
#2 Jaws (External Grip) 1-3/4" 3-11/16" (Internal Grip)
2-3/8" 4-1/2"
#3 Wide Jaws (External Grip) 3-11/16" 5-9/16" (Internal Grip)
4-3/8" 6-1/2"
Pin Jaws (External Grip) (Internal Grip)
From 1/4"
36.95
To 2"
1-1/8" 2-7/16"
#1 Step Jaws (Internal step 1) 3/16" 2-1/4’ (Internal step 2) 15/16"
3"
Dedicated Pen Blank Drilling Chuck Guaranteed to deliver perfectly centered pen blank holes
Tailstock drill chucks on p. 66
Installation on your lathe is amazingly simple and eliminates the need for a drill press and centering vise. The chuck includes two 2" jaws that will hold your blanks perfectly centered at the headstock. To drill a perfectly centered hole, just mount a drill chuck in your tailstock with your drill bit and advance the drill into your blank as it spins on your lathe. Vary the headstock speed to accommodate your blank and bit. Accommodates blanks up to 1" Square.
Jaws are 2" long, Chuck has a 1" x 8tpi thread, 2-1/2" diameter weighs only 1.0 lb, operated by 2 tommy bars (included). CSCPENCHK Pen Blank Drilling Chuck..............................................$
All faceplates have right-handed thread *
29.95 17.95 17.95 16.50 17.95 11.95 16.95
10 Pc Expanding Jam Chuck System Solves the jam chuck problem
Hand turning the chuck is time consuming and not always accurate. Insert the system’s tough rubber chuck into your work then expand it by turning a nut to conveniently secure the workpiece. This remarkable package includes five chucks plus the Forstner bits to drill the jam chuck
holes.Chuck and Bit sizes are 3/4", 1", 1-1/4", 1-1/2",and 2". CJAM10 10 pc Jam Chuck System ........................................................$ CJAM1 1" Jam Chuck ..............................................................................$ CJAM15 1-1/2" Jam Chuck........................................................................$ CJAM2X 2" dia. x 3" long Jam Chuck ..................................................$ CJAM10C Jam Chucks Only ......................................................................$
LA3418X Internal adapter, 1" x 8tpi to 3/4 x 16tpi ......................$
79.95 9.95
Replacement Jaws for all “C” style chucks
CJAWFJ1 Small Flat Jaws ..............$ Small Flat Jaws open to 5"
CJAWFJ2 Jumbo Flat Jaws ............$ Jumbo Flat Jaws open to 7-3/4"
1-3/8” Expanding Collet Chuck
Mount pocket watch blanks or small bowls with this double duty chuck
55.95 5.95 5.95
11.95 19.95
As a Collet Chuck - Drill a 1-3/8" hole about 3/8" deep into your work (the diameter of most mini-clock fit-ups.) Insert the chuck and twist it - expanding the jaws up to 1/8" for a firm inside
grip.Allows your work to be removed and remounted with no loss of concentricity. Converts to a Screw Chuck - Simply remove the collet jaws and screw in the supplied screw
center.FREE with purchase! 1- 3/8" Forstner Bit! A $12 Value
CXC4 1" x 8 tpi spindles ................................................................$ 29.95 TO ORDER • Call: 1-800-858-9295 • Fax with PO: 215-676-3716 • E-Mail with PO:
maria.schools@
pennstateind.com
32.95 34.95
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88
