CLOCK MOVEMENTS
Kieninger recommend that replacing a Kieninger clock movement is often quicker and more cost effective than servicing or repairing an old one. Using a new movement ensures you take full advantage of the advances in manufacturing technology. They state that their movements are ready to fit, however some lubrication may be required.
All in stock!
Movement Required: If you require a complete movement which is not listed below you can request a quote via our Kieninger movement parts search category by searching and selecting “movement” in the Kieninger clock part description look up and then add it as a non listed item, you will need to provide the pendulum length you require in the description field.
Pendulum Length: The Kieninger pendulum length is stamped on the back of the movement, next to or underneath the calibre. The “cm” length is measured from the hand shaft centre to the centre of the pendulum disc (bob).
KSU, MS, MSU & SKS Movements: Kieninger state that this movement is interchangeable with all KSU movements with the same pendulum length & hand shaft length (a different number after the KSU denotes an amendment to the movement such as different mounting brackets and does not effect the main features of the movement).
Kieninger AEL01
• ¼ Hour movement • Strike: Westminster chime • Hammers: 5 below • Plate size: 100 x 104mm • 6 bronze bushes • 5 Jewel Swiss escapement • Hand shaft length: 31.80mm (plate to hand nut thread)
Kieninger J0208
• ¼ Hour movement • Strike: Triple chime • Hammers: 8 below • Plate size: 100 x 104mm • 6 bronze bushes • 11 Jewel Swiss escapement with Incablock shock resistance, gold plated
• Hand shaft length: 27.80mm • Automatic night shut off • Seconds feature • Back windng • Permanent automatic night time shut off between 10pm & 7:15am
£210.00 Ref: K47718
Tel: +44 (0) 1708 757800
£665.00 Ref: K47723
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16
