RESEARCH I REVIEW
Carbon nanotube breakthrough shows solar promise
Lighter, more flexible, and cheaper than conventional solar-cell materials, carbon nanotubes (CNTs) have long shown promise for photovoltaics. But research stalled when CNTs proved to be inefficient, converting far less sunlight into power than other methods.
A RESEARCH TEAM led by Mark Hersam, professor of materials science and engineering and the Bette and Neison Harris Chair at the McCormick School of Engineering, has created a new type of CNT solar cell that appears twice as efficient as its predecessors. It is also the first CNT solar cell to have its performance certified by the NREL.
“The field had been hovering around 1 percent efficiency for about a decade; it had really plateaued,” Hersam said. “But we’ve been able to increase it to over 3 percent. It’s a significant jump.”
The research is described in the article “Polychiral Semiconducting Carbon Nanotube-Fullerene Solar Cells” in Nano Letters. The secret lies in the CNTs’ chirality, which is a combination of the tubes’ diameter and twist. When a thin sheet of carbon is rolled into a nanotube, several hundred different chiralities are possible. In the past, researchers tended to choose one particular chirality with good semiconducting properties and build an entire solar cell out of that one.
“The problem is that each nanotube chirality only absorbs a narrow range of optical wavelengths,” Hersam said. “If you make a solar cell out of a single chirality carbon nanotube, you basically throw away most of the solar light.”
Hersam’s team made a mixture of polychiral, or multiple chirality, semiconducting nanotubes. This maximized the amount of photocurrent
produced by absorbing a broader range of solar-spectrum wavelengths. The cells absorbed near-infrared wavelengths, a range that has been inaccessible.
While this is major progress for CNT solar cells, they still lag behind other materials in efficiency. Silicon, for example, can be 15-20 percent efficient, but it is more expensive to manufacture. “If you look at our performance, there’s certainly a big jump,” Hersam said. “But there’s more work to be done. We still have to advance this technology by a factor of three to five.”
Hersam said the next step is to create polychiral CNT solar cells that have multiple layers. Each layer would be optimized for a particular portion of the solar spectrum and, thus, absorb more light. He said they might also incorporate
other materials, such as organic or inorganic semiconductors, to complement CNTs.
“What we’d like to do is absorb every photon from the sun and convert it into electricity,” he said. “In other words, we’d like to have a solar cell that has an absorption spectrum perfectly matching solar light. We’re on a path toward that goal.”
Journal Reference: Maogang Gong, Tejas A. Shastry, Yu Xie, Marco Bernardi, Daniel Jasion, Kyle A. Luck, Tobin J. Marks, Jeffrey C. Grossman, Shenqiang Ren, Mark C. Hersam. Polychiral Semiconducting Carbon Nanotube–Fullerene Solar Cells. Nano Letters, 2014; 140811110717006 DOI: 10.1021/nl5027452
Issue V 2014 I
www.solar-international.net 77
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80