This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
• For 44" cut, center use with double pulley • For 46" cut, left hand spindle • 800-849 series H • 1988-1992 • Shaft length 6-5/16" • Use Oregon® 45-259 bearings
Ø.990 [25.15mm] 48-TOOTH SPLINE
6.375 [161.93mm]
Product Code
5/8-18 UNF THREAD
2.250 [57.15mm]
45-135 Replaces
15296A Description
• Open bearing cup for deck spindles • Fits Oregon® 82-500, 82-502, & 82-503
82-511 Replaces
618-0117 618-0112
Description
• For 46" deck • Blades with star hole • Uses double pulley • LH Spindle for 800 series 1996 & prior • Use Oregon® 45-259 bearing • Use Oregon® spindle shaft 85-053
82-512 Replaces
618-0111 Description
• For 46" deck • Fits star hole blades • RH & center for 800 series • Uses single pulley • 1993 to 1996 • (3) for 600 series riders • (2) for 800 series riders
• Use Oregon® 45-259 bearing
• Use Oregon® Pulley 44-102
2.500 [63.51mm] 4.200 [106.68mm] 618-0116 918-0116 S 918-0117
IMPORTANT! When installing spindles, follow all installation and maintenance instructions provided in the mowers owner/maintenance manual—including the correct torquing of the blade and pulley bolts/nuts as well as the lubrication of the spindle. Failure to do so may cause premature failure!