This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
• Fits Z-Force, GT series & LT series mowers with 38" & 42" deck using round hole blade • Use Oregon® bearing 45-205 & race 45-206
82-044 Replaces
918-3167 Description • Fits some 38" decks
5/8 - 18 UNF THREAD
618-3167 4.557 [115.76mm]
5/8 - 18 UNF THREAD
.625 [15.88mm]
618-3129A 918-3129B 918-3129
618-3129B 618-3129
3.000 [76.20mm] 1.125 [28.57mm]
Product Code
2.125 [53.98mm] 4.375 [111.13mm]
4.416 [112.17mm]
1.925 [48.89mm]
82-401 Replaces
918-04123B Description
618-04123B
• Fits LT series mowers with 46" deck • Round blade center hole • Use Oregon® bearing 45-205 & race 45-206
6.125 [155.58mm]
Ø5.500 [139.70mm]
1.000 [25.40mm]
3.000 [76.20mm]
82-402 Replaces
918-04124A Description
618-04124A
• Fits LT series mowers with 42" deck using round hole blade
• Use Oregon® bearing 45-205 & race 45-206 2.250 [57.15mm] S
82-403 Replaces
918-04126A 618-04126A 918-04126
Description
• Fits i1050, LT, SLT & RZT mowers with 50" deck using star center hole blade • Use Oregon® bearing 45-259
5/8 - 18 UNF THREAD
6.125 [155.57mm]
618-04126 618-04125 918-04125
5.500 [139.70mm]
5/8 - 18 UNF THREAD
1.000 [25.40mm] 6.250 [158.75mm]
6.250 [158.75mm]
1.000 [25.40mm]
1.937 [49.21mm]
IMPORTANT! When installing spindles, follow all installation and maintenance instructions provided in the mowers owner/maintenance manual—including the correct torquing of the blade and pulley bolts/nuts as well as the lubrication of the spindle. Failure to do so may cause premature failure!