Solid State Lighting
Product Name
Description • Molex LED Array Holders available for Bridgelux*, Citizen†
, Cree‡
, Nichia and Sharp**
• Certified and tested to UL 496 OLFB2 lampholder specification • Simplifies the COB (chip on board) LED installation process, reducing quality concerns associated with other installation methods such as hand solder
• Compression contacts to power array provide a reliable electrical connection • Double-ended wire-trap terminal to attach power source, allows for wiring single or serial LED sequences to ensure ease of assembly and design flexibility
LED Array Holders
• New elegant design features provide a clean and finished look to COB LED array installation • Molex LED holder designs address every aspect of COB LED installation: thermal management, reliable electrical connection and optical requirement
• New designs available for Cree XLamp‡ series CXA1507, CXA1512, CXA2520, CXA2530
• Mechanical attachment for directional optics (Optional CXA25) • Pre-load feature allows for attachment of COB LED to holder prior to attaching to heat sink, simplifying installation • Elegant design with flat landing surface for secondary optics and beveled area to allow for an uninterrupted beam pattern from lightsource
• High temperature thermal plastic housing to resist high heat environments Cree ‡ LED Array Holders
• Designed to accommodate Nichia L series COB LED arrays • Clearance provided around LED to easily incorporate secondary optics • Concealed wire trap cap protects electrical contacts and provides additional voltage isolation when incorporating metal reflectors
• High temperature thermal plastic housing to resist high heat environments
Nichia LED Array Holders
• Solderless connection design minimises handling of arrays during installation, greatly reducing the possibility of damage
• Eliminates specialised operator training and solder-joint inspection • Vertical snap-to-mate connection enables a fast, easy and reliable connection to the LED array holder • Low-profile 1.40mm connector height provides a slim design for space-limited applications and minimises risk of affecting light output
Pico-EZmate™ Harness
• Positive-lock latching feature provides an audible click to confirm connection • Available in 3 wire gauges and several length options for design flexibility (Bridgelux Vero* example shown in photo)
* Bridgelux and Vero are trademarks or registered trademarks of Bridgelux, Inc. †
Citizen is a registered trademark of Citizen Electronics Co., Ltd.
Cree and XLamp are registered trademarks of Cree, Inc. ** Sharp is a registered trademark of Sharp Electronics Corporation.
‡
www.avnet-abacus.eu/molex
45
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48