MATERIALS HANDLING
Simplified servicing U
Tyron Adam reports on how a benefi ciation plant in Zambia has saved US$1 million deploying modern, simplifi ed pump technology
ntil January 2017, a copper benefi ciation plant in Zambia was using pumps from six diff erent manufacturers. T is resulted in a steadily growing inventory of
similar spare parts and maintenance procedures. As a result, the eff ort and costs for necessary maintenance of the pumps were constantly increasing. T us the plant operator decided to simplify its spare parts inventory and maintenance - and only use pumps from a single supplier. Netzsch, represented by its subsidiary in South Africa, was chosen for the reliability of its pumps. T e Zambian company replaced 36 pumps for polymer applications and has subsequently saved US$1 million by reducing its overall spare parts inventory. “A lot of separate processes were running
in the treatment systems, each needing their own special equipment. But the heart of each process is typically a pump, to convey either the mineral sludge or the chemicals,” explains Roger Willis, business fi eld manager Chemical, Pulp & Paper. “It is also typical for each OEM to have a preferred pump supplier and the plant systems are therefore fi tted with lots of similar pumps from diff erent manufacturers.” T e result is that the number of similar components to be ordered and stored increases - which means complex maintenance processes that require a lot of time and money. To reduce the number of pump suppliers,
the German manufacturer is a good choice. It supplies various types of displacement pumps, including Nemo progressing cavity pumps, Notos multi screw pumps and Tornado rotary lobe pumps. Netzsch also provides comprehensive aftersales services, including everything from commissioning and documentation to spare parts sales, service and maintenance, replacement of wearing parts and plant modernisation. “We are making every eff ort to keep the costs of spare
48
www.engineerlive.com
parts and maintenance to a minimum so we can provide a cost-eff ective system,” says Willis. After delivering pumps to a plant and commissioning, Netzsch therefore puts a lot of eff ort into visiting plants to discuss the supply of spare parts and the necessary training with maintenance personnel. As the company has an extensive network of subsidiaries, including production plants in Germany, Brazil, China and India, and sales organisations in 30 other countries, its 2,000 employees can generally reach sites in the remotest regions.
Cost savings from standardisation T e plant maintenance department then checked the
maintenance costs of all its existing pumps. It turned out that standardising to one manufacturer would produce large savings. T e operator chose to switch to pumps from Netzsch because of the reliability and stability of the pumps that were already installed. “We agreed a running programme of changes, which involved gradually depleting the spare parts for the other manufacturers and replacing the pumps that were not from Netzsch one by one,” explains Willis. In total, the company supplied 36 pumps. T e changes, once implemented, allowed the plant operator to reduce its spare parts inventory substantially and save US$1 million. ●
Tyron Adam is with Netzsch.
www.netzsch.com
The Zambian company replaced 36 pumps for polymer applications and saved
US$1 million by reducing its spare parts inventory
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52
