DOORS, WINDOWS & CONSERVATORIES; FINANCE & INSURANCE 39
Window security – a clear solution By Martin Oates – Commercial Director with SE Controls
design requirement with all market leading systems tested to the PAS 24 standard to meet the demands of the Secure By Design
W
(SBD) initiative and Building Regulations Approved Document Q (ADQ). Automated windows that are utilised for
ventilation strategies will also need to comply to the standard, which requires the actuators to resist 3000N of negative force when the window is closed. This is becoming commonplace in applications such as school refurbishment where facade automation remains a popular and cost effective solution of providing improved ventilation performance over manually operated windows. The SECO N 24 25 twin actuator from SE
Controls has successfully passed the PAS 24 test and in addition to presenting physical resistance
indow security is a key
to intruders, it also provides a signal to the controller, should the window fail to close fully, to maintain the integrity of the security system, as requested by the SBD schools standard. Two locking points in one neat enclosure with programmable gasket relief optimise weather performance and security to meet BS 6375 parts one, two and three in addition to the PAS 24 test. Bespoke fixing brackets and reinforcement to the window is often required to provide sufficient strength for the fixing, which is usually the weakest point of resistance, as the actuator provides two x 4000N of resistance to forced opening. The ability to manufacture bespoke body lengths allows SE Controls to locate the locking points on different size windows exactly as tested, relative to the corners, to maintain consistency of performance and compliance. Test conducted with an actuator located at the centre of a vent will either not pass the test or can only be utilised for different widths. Similar to EN12101-2, the fabrication and installation solution requires a process that is
audited by an independent notified body and must be re-tested annually. If you have requirements for SBD or ADQ
certified automated windows, please contact the SE Controls team for further information.
01543 443060
www.secontrols.com Enq. 151
COMMERCIAL AND RESIDENTIAL HOUSING WARRANTIES 10 Year Structural Warranties backed by A Rated insurer for any sized project
New Homes Custom and Self Build Homes Social Housing/ Commercial Projects Housing already under Construction or Completed Renovation/Conversion/Distressed and Receiver Projects
BUILD-ZONE insurance Call the Build-Zone team on 0345 230 9873 or visit
www.buildzone.com Enq. 152
WWW.HBDONLINE.CO.UK
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60
