ADF01_38-47 1/29/08 12:16 PM Page 43
competitive prices. Computer nesting during
manufacture also helps to keep prices down.
Architectural metalwork specialists can have
a dedicated sheet metal punching facility, which
produces very large panels up to typically,
1200mm x 4000mm with a punching accuracy
of +/- 0.5mm.
Perforated infills can be produced in stainless
steel, aluminium or mild steel – the latter usually
being powder coated. A wide choice of solid
and metallic colours can be selected allowing
panels to be finished in corporate colours, the
building’s colour scheme or to contrast or
match the top rail.
As an alternative, wire rope, steel rod and
toughened glass infills can be supplied to
maximise visibility and give a light airy feel to a
buildings interior or stairway.
Balusters and top rails, either galvanised or
powder coated, are also a very popular option
but for increased aesthetics many specifiers
prefer polished or satin stainless steel. All these
alternative materials and finishes are low
maintenance – an important factor.
Solid timber top rails can also be supplied,
factory finished with a coat of varnish, providing
an attractive alternative to metal rails.
Most manufacturers of balustrades offer a
technical advisory service and are happy to
work with customers during the early stages of
a project to carry out site surveys and produce
means that a wide range of bespoke panels and street furniture. design solutions for any project. They also have
perforated or louvered panels can be Reduced set up and change-over times mean an intimate knowledge of the latest British
produced not only for balustrade infills but for that even when manufactured in small batches Standard and Building Regulations including
walkways and stairways, decorative roof or as ‘one-offs’, these can be produced at safety requirements for public stairs. 210
211 212
www.adfonline.eu www.adfonline.eu
See inside back cover for Reader Enquiry Card or go online: www.adfonline.eu
43
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52