rainwater products
and other architectural fittings, house design now allows matching or coordinating colours to be used. A buildings appearance can be dramatically transformed which can give it “curb appeal” especially when it comes to attracting clients. Traditional thinking goes out of the window and it is now common to see both rainwater products and roofline systems blending in to the building envelope and providing aesthetic appeal. Often there is debate over cost versus quality. There are different types of
aluminium rainwater systems, so whether a pressed, roll-formed, extruded or cast profile is required, there is almost certainly a product that will suit any budget, providing a cost effective and high performance solution. In looking to provide the one million homes by 2020, it is quite likely that
there will be an increase in the number of multiple occupancy dwellings split between both public and private ownership. Generally designed to be over two storeys high, these builds will have maintenance programmes in place and will make whole life time cost consideration of any installation an important commercial factor. The use of aluminium for roof drainage and on the eaves as fascia/soffit and coping provides a ‘fit and forget’ solution over the design life period, being easy to install, light and long-lasting, which also reduces the need to incur replacement material costs compared to other systems that may fail. More recently, we have seen that changing
environmental conditions in the UK are producing more storms and increased rainfall intensity. Leaking gutters can cause extensive damage, not only to the brickwork but also the interior of the property resulting in costly repairs. Rainwater systems provide a defence against this damage, which is often neglected, or given lower priority within the projects budget. Having a product that can either offer a jointless/seamless system or one where there is a reduced thermal movement will greatly reduce the chance of maintenance and repair costs getting out of hand. Manufacturers have stepped up to the mark by offering a variety of
interactive tools. The use of ‘Rainfall Calculators’ makes it easy for architects, engineers and installers to evaluate current drainage abilities of actual roofs, therefore making the planning and developing of projects a lot easier than it used to be. In summary, using aluminium as a rainwater drainage option should be
considered as an alternative to other types of systems as they both a cost-effective and high-performance solution.
Gutter maintenance
•Gutters should be checked twice per year and cleared
•Gutters and pipes should be kept clear of obstructions
•Rainwater systems should be washed down annually and inspected for damage
•Any damage discovered should be rectified and touch up paint applied if required
W:
www.rainguard.co.uk E:
sallyann@rainguard.co.uk
T: 0113 279 5854 Follow us on:
Brochure available
With over 40 years’ experience of supplying and fi tting rainwater systems we have a product to suit your unique requirements.
WHATEVER YOUR PROJECT - WE HAVE A STYLE TO MATCH YOURS
ALUMINIUM . GRP . CAST IRON COPPER . ZINC . STAINLESS STEEL
www.housingmmonline.co.uk | HMM March 2016 | 43
CI/SfB (52.5) I March 2013
ALUMINIUM . GRP . CAST IRON . COPPER . ZINC . STAINLESS STEEL
WE HAVE A STYLE TO MATCH YOURS
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52