Pulp Paper & Logistics
KEMIRA
LWC-paper) and board (test signal – called colloidal index –
Samples were taken from the 1 clearly demonstrates that can monitor, for example, chemical dosage that has a direct in the white water, could be controlled and adjusted based on
XXX 19
Figure 2: Kemira AutoFlite installation layout on a coated broke system
measurement signal is used for As a result of online dosing
400 and 1,000 g/t, depending on the quality of the coated broke, This type of dosage control enabled a more stable broke
system and wet-end to be • More stable turbidity and
• More stable turbidity and
from white water (short loop) are compares the results before and
clearly decrease the risk of paper
Figure 3: AutoFlite ‘colloidal index’ versus fixative dosage
September/October 2014
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36