HH-P1B HULL HUGR PWC FENDER
Docking a PWC has never been safer with the introduction of the HULL HUGR PWC Fender. Engineered specifically for PWCs, it hinges in the center to better protect PWC’s body from docks designed for bigger boats. It hooks under the rub rail with a molded acetyl hook integrated into the back of the fender. If your PWC has them, you’ll want to connect the top of the fender to a cleat or ski eye with the adjustable strap and vinyl dipped steel hook provided. If not, simply thread the strap though the rubber block provided and place it inside the PWC’s storage compartment, then shut it. The block holds the strap perfectly and will not damage the body. We recommend 2 fenders per PWC.
HH-20, 24, 36 HULL HUGR Modular FLAT EVA Fender
These HULL HUGR Fenders are easy to stow and will not puncture or absorb water. The flat design prevents from them from rolling or riding up. Link 2 or more together with the hook and loop straps provided. Manufactured from 3 layer dual density EVA. They’re great for rafting 2 boats together and very popular for sailboats and runabouts. Hook & Loop Strap and Fender Line
included. HH-20BL: 20 x 8 x 2 in., Blue
HH-24BL: 24 x 12 x 3 in., Blue HH-36BL: 36 x 12 x 3 in., Blue
HH-20GR: 20 x 8 x 2 in., Gray HH-24GR: 24 x 12 x 3 in., Gray HH-36GR: 36 x 12 x 3 in., Gray
HHB-C1W HULL HUGR
Dock Corner Bumper
These dock corner bumpers measure 10˝ x 10˝ x 4˝ x 2 1/2˝. They’re manufactured from UV-resistant and tear- proof vinyl/polyester tri-laminate, filled with high-density closed-cell polyethylene foam. There are 4 corrosion-proof polycarbonate grommets, 1 in each corner, for mounting to docks. White.
HH-S, HH-SW, HH-M, HH-MW, HH-L & HH-LW HULL HUGR
Traditional round fenders roll up, leaving boats unprotected and they’re bulky to stow. HULL HUGR to the rescue! When boats rock, HULL HUGR stays put. The innovative HULL HUGR protects boats better than 6 traditional fenders. The ingenious patented design enables you to fold it up to a very compact size, easy to stow, or use it as a cushion. Hull Hugr is constructed of UV and puncture resistant marine grade vinyl / polyester tri-laminate. Six blocks of durable closed-cell foam are sealed inside. There are 3 sizes to fit every boat, dock, and slip:
HH-S & SW: 7 1/2 feet long x 15 inches tall, 6 - 12 inch x 6 inch x 2 inch foam bumpers, folds to only 15 inches x 15 inches x 4 inches. HH-S: Blue HH-SW: White
HH-M & MW: 7 1/2 feet long x 22 inches tall, 6 - 20 inch x 6 inch x 2 inch foam bumpers, folds to only 22 inches x 15 inches x 4 inches. HH-M: Blue HH-MW: White
HH-L & LW: 9 feet long x 26 inches tall, 6 - 24 inch x 6 inch x 2-1/2 inch foam bumpers, folds to only 26 inches x 18 inches x 6 inches. HH-L: Blue HH-LW: White
72 HHB-24W HULL HUGR Dock Bumper A Great Value
All HULL HUGR products are manufactured from a UV-resistant and tear- proof vinyl / polyester tri-laminate. These dock bumpers are 24˝ x 4˝ x 2 1/2˝ and are filled with high-density closed-cell polyethylene foam. There are 4 corrosion-proof polycarbonate grommets for mounting to docks. White.
WORLD’S BEST PWC FENDER!
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88