waxmark Coding with wax


Highly topical: The Waxmark system places the emphasis on environmental compatibility in contactless product coding by using a combination of wax and resin with colour additives as the print medium. In this process, the resin is melted in a heating chamber and then processed by a piezo print head as “molten ink”. The wax melting chamber has an intake capa- city of approx. 100 ml. The equipment’s wax supply is monitored by way of a level regulator. An integrated LED signal lamp indicates when refilling is required.


The print results achieved by the Waxmark are impressive. It can produce 1 to 4 lines of text with a maximum font height of 10 mm. One additional advantage of the system: the wax particles cool immediately during the coding process thus very quickly rendering the coding erasure-proof.


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28