There are other unseen, or at least not too obvious, benefits of reducing size.
suppliers. In systems both complex and simple, the little things add up. In aircraſt, lighter electronics can allow for increased payload or more fuel for extended range. Keep in mind that those electronics must make every flight for the life of the plane, so while each individual flight might not amount to much over the life of the plane, the fuel expense could be significant. For soldiers who are
increasingly carrying
more electronic assets, the story is virtually the same, except that the lighter electronics will allow him to carry more of what military logistics experts call the critical “Tree Bs” required for combat: bullets, bandages and beans. Improved electrical performance is
another benefit of “getting small.” While many factors contribute to the overall performance of electronic products, one of easiest to identify and quantify is the proximity of components to one another. Tis is because the closer IC devices can be placed relative to one another, the faster they can communicate. In addition, they require less energy because of the shorter circuit paths. While the energy savings possible for one small product may not be much, when it is multiplied by millions or billions, the number quickly becomes appreciable. Another
benefit that stems from
product shrink is cost savings or value improvement. Te makers of ICs have been delivering higher performance at lower cost for more than four decades. Most of it comes from making transistors ever smaller with each new generation. IC package developers are more limited in terms of technical options to make things smaller and thus to get small, at least in terms of volume,
leading edge product
developers are increasingly looking for help in the 3rd dimension by stacking chips in packages and then stacking the packages themselves. Tere are other unseen, or at least not
too obvious, benefits of reducing size. A smaller electronic system can be packaged in a smaller box, which uses less material and thus reduces packaging cost. Tere are environmental benefits to shrinking products, too: smaller devices and systems use less resources and energy in their manufacture. To summarize, “getting small” relative
to electronics has a number of benefits, and it can provide many obvious and not
www.globalsmt.net
so obvious benefits to the manufacture and the user while reducing the product’s impact on the environment both in terms of materials and energy—so following the advice of Steve Martin is not so “wild and crazy” aſter all.
president Joseph Fjelstad has more than 35
of experience in electronic
Verdant Electronics founder and years
interconnection and packaging technology in a variety of capacities from chemist to process engineer and from international consultant to CEO. Mr. Fjelstad is also a well known author writing on the subject of electronic interconnection technologies. Prior to founding Verdant, Mr. Fjelstad co-founded SiliconPipe a leader in the development of high speed interconnection technologies. He was also formerly with Tessera Technologies,
a global leader
in chip-scale packaging, where he was appointed to the first corporate fellowship for his innovations.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80