PRODUCT RANGES
Bonding Fasteners - Male Threaded Studs
This range shows the most popular sizes but subject to minimum
order quantities, 40, 50, 60, 75 and 100mm stud lengths are also
available.
Male threads can be protected from contamination by an
appropriate part from our range of Flexible Protection Caps.
23mm Round Base 38mm Round Base
LENGTH
LENGTH
THREAD 12 16 20 25 30 THREAD 12 16 20 25 30
M4 B0N 001 B0N 002 B0N 003 B0N 004 B0N 005 M4 B0N 025 B0N 026 B0N 027 B0N 028 B0N 029
M5 B0N 006 B0N 007 B0N 008 B0N 009 B0N 010 M5 B0N 030 B0N 031 B0N 032 B0N 033 B0N 034
M6 B0N 011 B0N 012 B0N 013 B0N 014 B0N 015 M6 B0N 035 B0N 036 B0N 037 B0N 038 B0N 039
M8 B0N 016 B0N 017 B0N 018 B0N 019 B0N 020 M8 B0N 040 B0N 041 B0N 042 B0N 043 B0N 044
M10 - B0N 021 B0N 022 B0N 023 B0N 024 M10 - B0N 045 B0N 046 B0N 047 B0N 048
38 x 15mm Rectangular Base
LENGTH
THREAD 12 16 20 25 30
M4 B0N 049 B0N 050 B0N 051 B0N 052 B0N 053
L
M5 B0N 054 B0N 055 B0N 056 B0N 057 B0N 058
M6 B0N 059 B0N 060 B0N 061 B0N 062 B0N 063
M8 B0N 064 B0N 065 B0N 066 B0N 067 B0N 068
M10 - B0N 069 B0N 070 B0N 071 B0N 072
∅
Bonding Fasteners - Hex Nuts
This range is available with either open or closed bases. Open bases
allow the fixing screw to pass through the plane of the base plate,
whereas closed bases prohibit the ingress of substrate material into
the thread.
This range shows the most popular sizes but subject to minimum
order quantities, we can supply most combinations of Nut and any
one of the other sizes of Base Plate.
23mm Round Base 38mm Round Base
THREAD OPEN CLOSED THREAD OPEN CLOSED
M4 B0N 073 B0N 074 M4 B0N 081 B0N 082
M5 B0N 075 B0N 076 M5 B0N 083 B0N 084
M6 B0N 077 B0N 078 M6 B0N 085 B0N 086
M8 B0N 079 B0N 080 M8 B0N 087 B0N 088
38 x 15mm Rectangular Base
THREAD OPEN CLOSED
M4 B0N 089 B0N 090
M5 B0N 091 B0N 092
M6 B0N 093 B0N 094
M8 B0N 095 B0N 096
∅
BONDING FASTENERS
www.jetloc.com
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6