Motors and Drives
from the mains supply, is circulated around the motor to absorb heat, then discharged into a drain. However, closed loop systems are also used and, indeed, must be used with non-water cooling. In these, the coolant is constantly recirculated through a heat exhanger to cool it before it is reused. The heat exchanger can be simply air cooled, with the heat dissipated to atmosphere, or the heat energy can be stored and/or transferred for use elsewhere. There are other, less common, cooling systems, too. For instance, laboratory researchers developing super high-performance motors may find it necessary to use ultra-cold liquid nitrogen as the cooling agent. Elsewhere, subsea ROVs (remote operated vehicles) typically use very hardworking servomotors as propulsion drives, yet do not have an engineered cooling system; instead, exploiting the ocean depths as an ‘infinite heat sink’.
Cool and exotic
More exotic methods of motor cooling also exist and may become more common as motor uses and performance develop. For instance, in some high-performance applications heat generation may be extreme and therefore require rapid removal. In such cases it may be possible to cool the windings directly by having enclosed coolant channels running along the stator slots and between the windings. It is even possible to consider directly cooling the conductors by immersion in an electrically non-conductive coolant. Suitable fluids for this include deionised water (poor electrical conductor) and transformer oils (which are specially formulated to be non-conductive). Other methods of cooling include
spraying oil directly onto the end-turns of the conductors. For industrial engineers, heat
dissipation is often not a problem; motors either have enough free air flow or their standard cooling fan is more than adequate. However, consideration
must be given to thermal management if a motor is to be used in:
l A hot climate; l In a confined space where natural air flow is likely to be restricted;
l If it is possible for the motor to come into contact with flammable materials or with users’ hands;
l If thermal expansion could become an issue.
Instead, machinery engineers should bear in mind that the heat generated by electrical motors is the result of electrical and mechanical losses, i.e. inefficiencies. Therefore, if a motor is found to be running hot, it may be worth looking at the efficiency of the drive system. Replacing an older motor with a modern high-efficiency unit may solve thermal issues as well as reducing power consumption. Alternatively freeing a sticking bearing may pay dividends. Another possibility is that it may
be practical to recover the heat energy through a water jacket and use it elsewhere. In fact, the cooling of rotating
machines is codified in the standards IEC 34.6 and AS 1359.21, which provide guidelines on which cooling arrangements are likely to be appropriate in particular situations.
T
he simplest form of heat dispersal is through conduction into the surrounding air or structure of the driven machinery.
In an odd turn of events, automotive engineers may make the next big leap in electric motor development. Electric and hybrid vehicles are developing apace, and for them, dissipating heat from the electric motor is a major issue. The obvious solution is a radiator system, similar to those already found on cars, but the potential returns are such that it is worth exploring other options – and any new technology may transfer into industrial drives and other fields. l
Bill Bertram is with motor maker Marathon Electric, Eibergen, The Netherlands.
www.regalbeloit.eu
46
www.engineerlive.com
becoming more efficient, which means they are producing less heat – but still enough to require consideration by designers of motor-driven systems.
M Bill Bertram, Marathon Electric,
otor designs are steadily
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52