Power Transmission
in case expensive re-engineering is required. A traditional problem with replacing standard plummer blocks with SRB units is that the support pedestal base to shaft centreline is usually higher on a split bearing, meaning that machinery must first be modified before SRBs can be installed. Some split roller bearing
manufacturers will still mix-and-match, producing bearings with inconsistent inferior cage materials, older design features, and lower grade materials manufacturing techniques in an attempt presumably to maximise short-term profits and avoid additional investment in their range. This will have a negative impact on the long-term reliability of
the product and lead to reduced cost- savings for the end-user.
I
f a bearing is unable to survive in an industrial application then it will never deliver improved efficiency and cost savings.
Manufacturers have a responsibility to the customer to offer the best available design, technology and materials across its entire range and without a cost penalty. This policy ensures consistent performance and maximum ROI on a product that is designed to make saving by offering long-life and convenience in both operation and service. l
Robots given a helping hand G
earing experts Harmonic Drive AG has enhanced its partnership with Danish
manufacturer Universal Robots with the supply of HFUS-2SH Series Gears for use in the UR-5 six-axis flexible robot. The mechanical properties of the gear are used in the flexible lightweight UR-5’s six-axis robot arm. The move is an effort by Universal Robots to optimise production processes by reducing floor space and increasing flexibility. Traditionally, industrial robots are normally large and expensive, making them feasible only for large scale production environments.
The new powerful lightweight robots are designed for agile
manufacturing and can easily be set up for new processes, which now allows small and medium sized firms the option to install and move robots from multiple demanding environments, with minimum downtime The HFUS-2SH Series Gears, in four different sizes, provide over 100Nm of torque and weigh in at only 1kg. The zero backlash gear is used on all six axes of the robot arm, meaning that
40
www.engineerlive.com
In addition to the high reduction ratio, the gear output operates at high speed, allowing the robots to work extremely dynamically.
“Linear systems are used in many robot applications,” explained Graham Mackrell, managing director of Harmonic Drive UK. “The problem is that they’re often heavy, inflexible and take up a great deal of space. The gear we’ve developed for Universal Robots
an 18kg robot, working in a radius of 850mm, can handle loads of up to 5kg. The gear’s single-stage 100:1
reduction ratio provides sufficient torque capacity at the arm joints, eliminating the need to use high power, heavy motors.
is built directly into the robotic arm providing the most compact and elegant solution which is particularly useful when they are deployed in small or medium companies where factory space is often at a premium.
“Fitted with special purpose grippers, these robots can now take parts directly from the machines and finish them with incredible precision. They can sort and even count different parts automatically, eliminating the need for manual labour, saving even more time. “We’ve made the
HFUS-2SH Series available in nine sizes from 30 to 160:1 reduction ratio, with repeatable peak torque settings between 9Nm and 1,840Nm.
“The tilt resistant output bearing means high working loads can be applied without requiring further support. Not only are the units compact and lightweight, they also feature a large hollow shaft and can operate between -40 and +90˚C, with custom lubricants,” said Graham. l
For more information, visit
http://harmonicdrive.de/en/home
Adrian Menzies is with Revolvo Ltd, Dudley, West Midlands, UK.
www.revolvo.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52