This book includes a plain text version that is designed for high accessibility. To use this version please follow this link.
Technical Envelope


Yamanashi, as the small water pump is activated using electricity generated by solar cells installed on the building’s south-facing eaves. In addition, the capital cost, including plumbing and computer timer control, was just 0.02% of the building’s total construction cost. Nikken Sekkei is currently designing


two unnamed buildings in Japan to incorporate a modifi ed version of Bioskin, and is looking for other suitable projects in Southeast Asian countries where the climate is similar. “Bioskin is very sensitive to the specifi c


environmental conditions and as such is not well suited to mass-production like solar photovoltaics,” says Yamanashi. “The technology must go through many computer simulations and redesigns based on the environmental and contextual situation of each project. “The world of sustainable architecture


is currently too focused on big technical innovations, which when talking about environmental matters is quite dangerous. Bioskin is a low impact biomimetic system and I hope we can develop it to change the world mildly through some projects.”


“We are harvesting algae every day, depending on the amount of sunlight, and gaining much more heat from the system than we expected” Martin Pauli, Arup


Plant life: microalgae inside glass panels are harvested to produce biogas to help meet the building’s energy requirements


Hamburg’s power plants


NATURAL PROCESSES are also the inspiration behind the world’s fi rst bioreactive facade, installed as part of an exemplar housing project at Hamburg’s International Building Exhibition in January 2013, which is now yielding positive results that could signal a paradigm shift in intelligent envelope design. The four-storey apartment block,


known as BIQ, is fi tted with a secondary facade designed to cultivate microalgae inside glass shading louvres fi lled with circulating water and nutrients. This “solar leaf” technology has been pioneered by consulting engineer Ove Arup in collaboration with Germany’s Spitterwork Architects and biotech company Strategic Science Consult. The tiny plants, most no larger than bacteria, grow inside the panels in response to direct sunlight and are harvested and fermented to produce


42 | SEPTEMBER 2014 | CONSTRUCTION MANAGER


biogas to help fuel the building’s energy requirements. The system also acts as form of adaptive shading — as the level of sunlight increases, so the algae multiplies, makes the panels more opaque and provides more shade.


Positive results The two-year research project is gathering data on performance from multiple sensors and is due to publish its results at the end of 2014. The concept has proved effective so far, explains Martin Pauli, project architect at Arup: “Overall performance is quite good, we are harvesting algae every day, depending on the amount of sunlight, and gaining much more heat from the system than we expected at the start. “During design we were unable to


simulate the amount of algae that might be produced, so every gram we harvest is good news and I have a feeling effi ciency is already quite good.” The amount of algae harvested is subject to varying weather and


environmental conditions, although Pauli was unable to confi rm whether a target to create 15g of algae biomass per sq m of glazing has been met. In principle, the effi ciency of the conversion of light to biomass is 10% and of light to heat 38%. By comparison, solar photovoltaic systems have a conversion effi ciency of 12-15% and solar thermal systems 60-65%. As the experiment progresses, a


series of “process variations” are being introduced every two months in an effort to identify ways to improve performance and move the system from concept to reality. Different water temperatures have been tested and during the winter a form of Arctic algae was introduced into the louvres in the hope that it would thrive in the cold. “The aim is to create a harmonious


‘comfort zone’ to enable the algae to thrive in different conditions,” says Pauli. “The Arctic algae would have been a perfect story because being able to vary the algae in different seasons avoids the need to heat or cool the


>


Photograph: Colt International GmbH


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68