Keeper
YEAH RIGHT, AND THEY MADE CANOES OUT OF ALUMINUM. SURE. WHATEVER.
PHOTO: COURTESY ASHLEY GRITTNER / NRS
One of the products he carried was the
Hi-Float Life Vest Kit. That’s right, I said kit—a sew-it-yourself life jacket package. I ordered my kit by mail in early 1980 for
$24.50. I still have the receipt. It contained precut panels of burly nylon fabric, strips of soft buoyant foam, a heavy-duty zipper, ny- lon thread and complete instructions con- taining this troubling note:
BUOYANCY AID HOMEMADE
THE MAIL-ORDER PACKAGE OF FOAM AND FABRIC THAT BECAME A GO-TO FOR RIVER GUIDES
THESE DAYS THERE ARE HUNDREDS of life jackets to choose from. They’re exten- sively tested to earn Coast Guard approval and designed to be perfectly comfortable, whatever your water sport. It wasn’t always this way. I started boating in the mid-’70s when
a coworker invited me on a day float on Idaho’s North Fork of the Clearwater River. I was hooked from that first trip and had my own raft by the following year. Life jackets of that era were crappy—ill fitting, flimsy or bulky. And I’m not much of a swimmer. After seeing a horse collar vest rip off a
friend getting maytagged in a hydraulic, and a chesty “Mae West” jacket come untied, I went looking for alternatives. My criteria: a secure fit, durability and lots of flotation. I looked in local stores but didn’t find it. Boating magazines of the day carried ads
for Wildwater Designs, a company owned by Charlie Walbridge. Charlie is a whitewa- ter safety expert, coauthor of the pioneer- ing Whitewater Rescue Manual and one of the original Hall of Fame.
inductees in the Whitewater 28 | RAPID
Some people have complained that these life vests trap water. If yours does you can allow for drainage in this way. Get a nail, a candle, and a pair of pliers. Light the candle, grasp the nail with the pliers, and heat it until it is quite hot. Use the nail to punch holes in the bottom of each foam compartment. The heat will seal the edges of the hole.
I didn’t know how to run a sewing ma-
chine, but wanted to put it together myself. My wife, an excellent seamstress, coached me through the process. The result was a tough, snug-fitting, high-flotation jacket. The pounds of buoyancy it advertised were well up in the twenties. You could fold up the portion below the waist tie to make it more compact, or wear it down full length. At some point, I added a between-the-legs strap to make it even more secure. That jacket saved my bacon many times,
down hundreds of river miles, including all of Idaho’s crown jewel rivers and on far- away floats like the Grand Canyon. I had some classic swims but it always bobbed me to the surface. I wore my Hi-Float for almost 20 years,
until the zipper finally failed. When I saw Charlie at a swiftwater rescue
clinic in 2004, I brought out the old jacket to show him. He thought I was trying to get it warrantied! Charlie eventually sold the design to Ex-
trasport, whose current Swiftwater Ranger Rescue Jacket is a direct descendant of the Hi-Float, although it comes fully assembled. My Hi-Float could get hot, it wasn’t ad-
justable and it didn’t carry any certification, but I made it myself, it was custom-sized and I trusted it with my life.
CLYDE NICELY’S CHIEF PASSION IS MULTI-DAY RAFTING. HE STRINGS WORDS TOGETHER FOR A LIVING AS THE E-NEWS EDITOR AT NRS.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64