TECHNOLOGY IN ACTION enter 808


ased on own transport and handling technologies, the company configures


Advertorial


entire manufacturing and assembly lines. Linear technology with outstanding speed


Production flow in industrial goods industry B


and flexibility allows for the minimization of cycle times in press room automation. RoundTrack floor rails, designed for


Schneider Electric’s


Lexium32i integrated servomotor with modular design


with integrated electronics combines the simplicity of the Lexium 32 drive and the powerful Lexium BMI brushless servomotor in one single unit. With a unique modular concept, Lexium32i combines of four components:


M


• BMI motor with power stage, • Lexium32 drive control unit, • power supply connector module and • I/O and fieldbus connector module.


By using the online-configurator, it is easy to


select the four catalogued components which will make the user’s Lexium 32i dedicated to their applications and these four components are also easy to assemble- simply click on each component and attach in less than 3 minutes. This reduces assembly time with simplified wiring and easy cabling and improve energy efficiency.


Motion Control Products Ltd


Tel: 01202 599922 Web: www.motioncontrolproducts.com


enter 808 Nordson EFD


otion Control Products Ltd recently introduced Schneider Electric’s Lexium 32i servomotor


heavy-load transport, enable flow production of machine tools, wind turbine rotor blades, and other difficult-to-handle industrial goods.


STROTHMANN Machines & Handling GmbH Tel: +49 5207 9122-0 Web: www.strothmann.com enter 809


Nordson EFD consistent, precise 781S spray valve system T


he 781S Series Low Volume Low Pressure (LVLP) spray systems provide consistent coating of low to medium viscosity fluids.


Microliter to milliliter amounts can be reliably dispensed in round patterns with diameters ranging from 4.3 to 50.8 mm (0.17" to 2.0") and in fan patterns with widths up to 165.1 mm (6.5"). The combination of adjustable fluid flow, adjustable nozzle air and post-air cutoff provides excellent spray control. The system includes compact spray valve, ValveMate™ controller


and tank. The controller is set for length of time and air pressure required for precise coverage. Programmable nozzle air delay after each spray cycle keeps the spray nozzle clog-free and reduces maintenance and downtime.


Tel: 01582 666334 Web: www.nordsonefd.com enter 810


Pflitsch & Co will be introducing the new UNI Split Gland at the Light & Build show and the Hannover Fair


Replacement needed - no problem The splittability of the cable gland allows not


only preassembled cables to be installed, through its simple construction and low number of components it also offers the advantage of quick and safe installation - without needing to remove already installed cables or interrupt on-going production. The UNI Split Gland® can be opened again at any time without great effort to allow cables to be installed or reinstalled later.


Conventional developments Installing the UNI Split Gland® is quick and easy


entries with the fully splittable UNI Split Gland® plastic cable gland. The cable gland body and the pressure screw consist of two halves, the sealing inserts are slit at the side and thus allow preassembled cables to be placed in them. The special point about the UNI Split Gland®: the splittability of the cable gland body allows the whole of the hole diameter (M25) to be used for feeding through prefitted plugs


M The UNI Split Gland® is based on the UNI


Dicht® principle and therefore ensures the cable is dependably sealed without being irreparably cut


inimum parts for maximum efficiency. PFLITSCH extends its range of splittable cable


into or severely indented. All TPE-V sealing inserts size E 154 from the UNI Dicht® range - from the solid to the multiple-cable sealing insert - can be used with the split cable gland. This product reliably seals cables with diameters from 2.0 mm up to 20.5 mm. The softsquashing action exerted by the sealing


insert over a large area of the cable sheath, the seal in the plane of the split and a further seal at the connection thread ensure that the gland achieves IP 67 protection in accordance with EN 60529. The UNI Split Gland® made from polycarbonate also excels with strain relief in accordance with EN 50262 and an operating temperature range of -20°C to +80°C.


/ DESIGNSOLUTIONS


thanks to its few components: place the cable into the sealing insert - PFLITSCH has a practical set of spreading pliers available to help with this - fit the two halves of the cable gland body around the cable already in the sealing insert, bring the two halves together ready to engage and finally engage them. The cable gland body is now installed in the housing - either screwed into the thread or fastened with a splittable counter nut from the inside - and the sealing insert pushed into it. Then the two halves of the pressure screw are placed around the cable, locked with one another and screwed on to the cable gland body.


Walter Logan & Co Ltd Tel 0208 492 9704 sales@walterlogan.com


enter 811 DESIGN SOLUTIONS | APRIL 2014 35


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44