This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
1 ” (1.6mm) 160° to 170° F (70° to 75°C) water for 35 seconds ⁄32
⁄16
3 ” (2.4mm) 160° to 170° F (70° to 75°C) water for 1 minute ⁄8
1 ” (3.2mm) 160° to 170° F (70° to 75°C) water for 1 minute ⁄16
1 ” (1.6mm) 1 to 2 minutes of working time ⁄32
3 ” (2.4mm) 2 to 3 minutes of working time 1 ” (3.2mm) 4 to 6 minutes of working time⁄8 3 ” (4.8mm) 4 to 7 minutes working time⁄16
3 ” (4.8mm) 160° to 170° F (70° to 75°C) water for 1 to 2 minutes ⁄16
Aquaplast®
-T
Splinting
Rolyan® Aquaplast®-T. Handling Characteristics
The optimum combination of intimate conform- ability and resistant stretch • 100% memory allows repeated reheating and economical splint revisions • 13% UltraPerf®
light-weight finger or hand splints requiring breathability
• 19% OptiPerf™ perforation pattern provides su-
perior ventilation for comfort while maintaining material strength and easy edge finishing • Clear when heated. Edges trim easily
Bond-Ability • Aquaplast®
-T — for a temporary bond, pinch • Aquaplast® perforation pattern is ideal for
heated surfaces together; for a permanent bond, remove coating with liquid remover or by scraping with a sharp instrument or sand paper Original — bonds permanently
when heated surfaces are pinched together Recommended Uses • Ideal for serial splints • Hand, wrist, finger and thumb splints • Dynamic outrigger bases • Elbow splints using the pinch technique
See page 458 for pinch technique.
1/16” x 18” x 24” (1.6mm x 46cm x 61cm) 4 Per Case 13%