This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
LANDSCAPING Prices and offers valid from 13th March to 11th June 2013
Drivesett Tegula Walling Cotswold
Traditional
Code Qty 218627 218626 218625
Size (mm)
320Pk 220 x 100 x 65 240Pk 300 x 100 x 65
Price inc VAT
(£56.85/m²) £400.23 (£56.24/m²) £404.92
80Pk 440 x 100 x 140 (£111.97/m²) £394.13
7d 7d 7d
Code Qty 210936 218567 218568
Size (mm)
320Pk 220 x 100 x 65 240Pk 300 x 100 x 65
Price inc VAT
(£61.58/m²) £394.13 (£52.81/m²) £380.21
80Pk 440 x 100 x 140 (£104.14/m²) £366.59 Please Note: When using Drivesett Tegula Walling, if your wall is more than 325mm high, double skinned construction is required. Croft Walling
7d 7d 7d
Stage 1
Dig a trench to the depth of full block plus 150mm for foundation material. Width should be minimum 2 times the wall thickness (foundation material should extend 85mm to the front and rear of first course block).
Stage 2
Place material (MOT Type 1 or similar) onto trench and compact. Spread sand over foundation material. This will make it easier to level the first course block.
Stage 3
Position first course blocks side by side to required line, level block in both directions.
Stage 4
Code Colour Qty Size (mm) 187869 Buff
Price inc VAT 90Pk 300 x 170 x 100 (£136.86/m²) £369.51
218571 Weathered 90Pk 300 x 170 x 100 (£150.93/m²) £407.51 Available to buy in-store.
584
7d 7d
Each course must be backfilled accordingly. The backfill zone consists of 300mm of free draining material followed by backfill material. The backfill zone should be at least equal to the wall height.
Stage 5
Lay blocks in a stretcher bond fashion repeating stage 4 until the wall height is achieved (Max. 600mm).
Stage 6
Min. internal and external radius – 750mm on the bottom course.