AT = Solid nose, laser welded tip with wear-resistant alloy LA = Solid nose, (Laser-Lite®)
POWER MATCH®
RN = Replaceable sprocket-nose PM = Replaceable sprocket-nose RW = Replaceable sprocket-nose GN = Replaceable sprocket-nose with Guard Mate® holes
PRO-LITE®
SP = Sprocket-nose GP = Sprocket-nose with Guard Mate® holes SL = Sprocket-nose GL = Sprocket-nose with Guard Mate® holes MP = Narrow-kerf sprocket-nose MG = Narrow-kerf sprocket-nose with Guard Mate® holes
PRO-AM
SX = Sprocket-nose PX = Sprocket-nose GD = Sprocket-nose with Guard Mate® holes ML = Narrow-kerf sprocket-nose SF = Sprocket-nose
DOUBLE GUARD®
SD = Sprocket-nose DG = Sprocket-nose with Guard Mate® holes ML = Narrow-kerf sprocket-nose
Comments: • In a few cases, where two bars would have the same length in their part numbers but different drive-link counts, the letter Z will be used in the bar-mount description to distinguish between them (K095 and Z095 for example).
• Chainsaws originally equipped with an Intenz® bar, and saws adapted to take an Intenz® bar, do not have a “bar-adjustment pin” for tensioning the chain. Use ONLY an Intenz® bar when replacing the guide bar on these saws. See page for 9 for important information on Intenz® bars.
• Power Match® solid body bars may be stamped with XXX, ZZZ or other letters as they can have different noses installed on the body, thereby changing the part number.
• Guard Mate® holes are built into the noses of certain types of OREGON® bars and allow the attachment of a Guard Mate tip guard to help reduce the risk of kickback.
• OREGON® Sculptor™ carving bar part numbers do not follow the OREGON® bar part numbering system.
Bar types and part numbers printed in red have been obsoleted. Contact your authorized OREGON® distributor for availability.