Bogen High Fidelity Series
Bogen’s coaxial 2-way hi-fi ceiling speakers deliver unsurpassed performance and value. The HFCS1(LP)’s steel back can and front exit venting allow for deep bass response, enhancing the quality and intelligibility of both speech and music. The HFCS1LP uses a smaller, low-profile back can that allows for a greater range of installations. Both speakers can be installed either in suspended ceiling structures or hard surfaces (such as sheetrock). They come ready to install with integral swinging arm clamps. An optional mounting bracket (TBCR) is available for additional support (recommended for all suspended ceiling applications). The bracket can also be used for new construction ceilings, providing a cutout guide behind the sheetrock surface and as a C-ring to stiffen the edges of the cutout opening.
Bogen “HFCS1 (65Hz to 19 kHz) and HFCS1LP (Low Profile)” (78 Hz to 19 kHz) High Fidelity Ceiling Speakers
• Available in 16 ohm (75 Watts) and 70V (selectable tap setting from 1Watt to 32 Watts) • Large back can designed for extended bass response (HFCS1) • 6-1/2 inch high stability polypropylene cone/3/4 inch durable polycarbonate tweeter cone • Fire rated 94V0 ABS baffle • Easy wiring with 4 terminal snap on input connector (providing loop through) • Listed to UL standard 60065 for US and Canada • Optional TBCR tile bridge and CK10 safety cable
Bogen “HFSF1” (78Hz to 20 kHz) High Fidelity Small Footprint Ceiling Speaker
• Available in 16 ohm (50 Watts) and 70V (selectable tap setting from 1 Watt to 16 Watts) • Big dynamic sound from a 7-1/4 inch diameter/7-1/2 inch depth speaker housing • Wide dispersion coaxial driver for broad even coverage • Quick wiring with removable plug in connector providing loop through terminals • Listed to UL standard 60065 for US and Canada • Optional TBSF tile bridge and CK10 safety cable
Bogen “C-SUB” In-Ceiling Sub (40Hz)
• Available in both 8 ohm (150 Watts) and 70V (selectable tap setting from 2 Watts to 64 Watts) • Measures 15-1/2 inch diameter x 12-1/2 inch depth dousing • Integral swing out mounting clamps eliminate clumsy install and need the a tile bridge • Internal cross overs do not require separate sub channel • Listed to UL standard 60065 for US and Canada • Fire rated (94V0) ABS baffle
www.adiglobal.com 2 41
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68