Exploration • Drilling • Field Services
Ensuring essential accuracy during custody transfer
Jeffery Still outlines the only petroleum test facility in the world that can ensure true calibration over a dynamic Reynolds Number range of 100 to 1,000,000.
M
ore than 90 million* barrels of petroleum are produced
around the world each day. With that volume of product and the magnitude of commerce it represents, precise custody transfer measurement is the foundation for an orderly global petroleum market. FMC Technologies’ Flow
Research and Test Facility in Erie, Pennsylvania is capable of testing meters at the widest dynamic measurement range of any test facility in the world. Accredited in August 2011 by the US
Department of Commerce’s National Institute of Standards and Technology (NIST), FMC Technologies’ Flow Research and Test Center is the only petroleum test laboratory in the world that can ensure true calibration over a dynamic Reynolds Number** range of 100 to 1,000,000. Tis significant investment in procedures and equipment has allowed FMC Technologies’ Flow Research and Test Center to meet the accreditation requirements of ISO 17025. As a result of the accreditation, FMC Technologies is the only manufacturer of custody transfer meters with an on-site test facility capable of dynamic measurement. Positive displacement (PD) meters, conventional turbine meters, helical turbine meters, and ultrasonic meters can be tested under dynamically similar operating conditions to guarantee performance in any crude oil application. ‘Dynamic’ quantity measures the volume
of moving petroleum. In dynamic quantity determination, meter selection is most important because the meter is the device that registers precise measurement. Te objective of the dynamic measurement is to calculate, via a meter, the gross volume of petroleum delivered in a custody transfer. Tat volume is expressed in barrels-
per-hour at specific referenced conditions that account for temperature, density, viscosity, flow, velocity, pressure, sediment and water, among other conditions. Factory calibration of high performance ultrasonic or helical turbine meters to operating conditions requires a technically capable and highly accurate test laboratory. Te National Voluntary Laboratory Accreditation Program (NVLAP), run by the US National Institute of Standards and Technology (NIST), ensures that a laboratory fully meets international laboratory standards defined by ISO/IEC 17025. To gain accreditation all measurements recorded in the lab must be traceable through a National Metrology Institute (NMI) such as NIST. NIST is a member of the International Organization of Legal Metrology (OIML). During the accreditation process for FMC Technologies’ lab, the accreditation body, NVLAP, assessed factors relevant to its ability to produce precise and accurate test and calibration data, including the: technical competence of staff; test methods; traceability of measurements and calibration; suitability, calibration, and maintenance of equipment under test; handling and transportation of test items; quality assurance of test and calibration data. ●
Enter 41 or ✔ at
www.engineerlive.com/iog Jeffery Still is with FMC Technologies, Erie, Pennsylvania, USA
erieflowlab@fmcti.com
Fig. 1. Testing high performance ultrasonic or turbine meters to operating conditions requires a highly accurate test laboratory. FMC’s Flow Research and Calibration Lab is accredited through NVLAP (NVLAP Laboratory Code 200939-0) to ISO/IEC 17025:2005 and meets all OIML standards.
* Energy Information Administration, US Government Official Energy Statistics.
** Reynolds Number. A dimensionless number which is significant in the design of a model of any system in which the effect of viscosity is important in controlling the velocities or the flow pattern of a fluid; equal to the density of a fluid, times its velocity, times a characteristic length, divided by the fluid viscosity. Symbolized NRe. Also known as Damköhler number V (DaV).
www.engineerlive.com 41
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86