Tarl Kempley, shooter and designer of the BeeSting, set up payment via PayPal then sent tracking details. Starting in Carson City, it traveled to Phoenix, then LA, in and out of US customs, then a couple of days later it arrived in GB - into our customs and out (3 days) - finally arriving at ParcelForce where, having paid the import duty, I took delivery.
On arriving home I eagerly opened the box. Together with the tuner/tube is the location ring, suitable allen key and a book of instructions. I also ordered an extra weight (optional). I have to say the BeeSting is as good looking and as well made as it looks on the web site but, would it produce the results I wanted?
Following the instructions, I soon had the BeeSting fitted and ready to shoot. My friend called to say he had had problems getting a zero at 25 yards and was going to fit a riser block to the rear sight. On examination of the carbon fibre tube I found it to be about 2mm larger in diameter than the rifle muzzle accounting for the inability to get a zero at 25yards. Amongst all my bits I had an 8mm block, so fitted that ready to shoot the rifle that evening at 25 yards.
As is normal when first shooting with a tube, it’s not always possible to have a zero from the word go - you will see my first shot was wide of the black by three quarters of an inch. Adjusting windage, my next was a quarter of an inch off the black. Giving windage a good wind by luck more than judgement, my third shot went inside the bull at 9 ‘o’ clock. A couple more clicks and I shot another four rounds through the same hole.
Moving to the left-hand middle diagram - five shots clean in. Then, starting top right to left, all shots clean in, then bottom right to left all clean in. So, once on target, I had shot 18 consecutive bulls. The next question was how would the BeeSting perform at 50m? Examining the rear sight elevation the following day I thought the 8mm riser to be a little high so replaced it with a 4mm unit.
My first outing at 50m was a dull, windy day, the clouds were clearly rattling by right to left and the weather forecast gave wind speed at 12mph - not ideal.
41
BeeSting Barrel Tuner By Ray Cockayne
I had acquired a couple of thousand rounds of Tenex at the right price and decided to use that. Looking at the batch number I seemed to recall testing it at Eley, so dug out my test results over the past couple of years and sure enough there it was. It had a consolidated score of 22.7mm edge to edge after forty shots and had been rejected - I had bought a batch that gave far better results. This would really test the effect of having a tuner, could it improve the ammo good enough to hold the bull?
Following Tarl’s instructions, I shot using the mid setting - clearly the group was quite spread. Turning the weight five marks rearward gave little improvement, then another five and another, it seemed to be getting better but I wasn’t happy. I was getting very cold so I eventually called it a day, a little disappointed not having found a good tune.
My next outing was with my friend who also needed to tune his for 50m but, after expending another box and more of ammunition in very good conditions, it didn’t seem any better. Today I went back to the range with Celia my shooting companion and decided to wind the weight forward of the mid setting. After fifteen shots I knew it was going in the right direction, I had it in tune just 17-18 marks forward and began to settle down to shoot some serious groups.
I wanted at least a card scoring a ton, time and again I fluffed the odd shot scoring 99 with tight grouping then did what I had set out to do - a ton. Remember, this is with rejected ammunition and me shooting from my wheelchair - not the most stable of platforms because it has suspension.
Having used the Starik tuner for the last year, I have come to appreciate its benefits but without any reference marks it’s just not possible to revert to a previous setting for a different batch or distance shot.
I also like to shoot at 100 yards and this has a different point of tune. The BeeSting overcomes this with its micrometer setting marks, coupled with the ability to
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118