PRODUCTS & SERVICES Telephone: 020 7880 6206 Email:
darren.hale@redactive.co.uk
Star ensures bank staff keep their cool in the City Star Refrigeration has supplied a bespoke plant for HVAC cooling at the London offices of an investment bank. The existing plant at the firm’s client administration centre in the City was due for replacement. The plant operated on R22, an ozone-depleting HCFC refrigerant currently being phased out by EU regulations. Star designed a new low maintenance cooling plant to improve efficiency, reduce noise and ensure the highest reliability for the building’s heating, air conditioning and ventilation system. l For more information call 0141 638 7916 or visit
www.star-ref.co.uk
Shorts Environmental – low-carbon heating and cooling specialists Shorts Environmental is offering the building services industry a complete energy-saving and sustainable package for heating and cooling plant that will feed HVAC systems in all types of property. Shorts' service includes the design, supply, primary circuit installation commissioning and after sales maintenance service support. The services include application advice and selection of the appropriate specialist equipment for a project; direct assistance with integration of its products alongside other services; running cost calculations; life cycle cost evaluation; and investment analysis. l For more information visit
www.shorts-env.co.uk
St Helens takes the advantage with Prysmian FP Prysmian’s FP200 Gold cable has been installed into the fire alarm and the voice alarm system at St Helens RFC’s new stadium, Langtree Park. The Saints have left their old ground at Knowsley Road to begin the season at the new 18,000-capacity stadium. Fire safety systems are of paramount importance. Prysmian’s FP200 Gold complies with the requirements of both fire alarm standard BS 5839 and emergency lighting standard BS 5266, and is BASEC and LPCB certified. This hard skin, fire resistant cable incorporates unique Insudite insulation. l For more information call 023 8029 5029 or email
cables.marketing.uk@
prysmian.com
Outstanding lesson for school energy saving with Dimplex An acclaimed Hertfordshire school is setting the standards in energy saving, and is one of the first in the UK to install a Dimplex air source heat pump. Sir John Lawes School in Harpenden has an Ofsted rating of ‘Outstanding’ for its Education for Sustainable Development work. A Dimplex LA 40 TU, 40 kW air source heat pump has been installed by Dimplex installer partner Azure Natural Energy Systems, to provide heating for three new classrooms, two offices and communal area in the new building. l For more information call 0845 601 5111 or visit
www.dimplex.co.uk
MHS Boilers top of the class in ultra-efficient heating Pupils and staff at Dr Thomlinson’s Church of England Middle School in Rothbury, Northumberland, are benefiting from ultra- efficient, heating and hot water, thanks to two 251kW fully condensing, gas-fired Ultramax R603 boilers, supplied by MHS Boilers – part of Elco Heating Solutions. Replacing an ageing gas-fired system, the installation is designed to increase energy efficiency and reduce the carbon footprint for the school. The M&E contractors were Cleveland-based Geoffrey Robinson Ltd. l For more information visit
www.mhsboilers.com
Chevin Housing Association offers tenants a cosier low-cost future with air source heat pumps Residents in some 30 homes are looking forward to a cosier new year following the replacement of their electric storage heaters with air source heat pumps. Chevin Housing Association operates across Yorkshire, Humberside and the North Midlands, managing more than 8,000 homes, and is a member of the Together Housing Group. Having trialled the Ecodan heat pumps in three of its properties, the social housing landlord has chosen to use a £175,000 grant, awarded by the Department of Energy and Climate Change, to fit more of these pumps to its homes. l For more information visit
www.domesticheating.mitsubishielectric.co.uk
www.cibsejournal.com
Wade for quality drainage products and innovations At its factory at Halstead, Essex, Wade manufactures a range of drainage products for use in, on and near buildings, worldwide. Its latest product innovation is a stainless steel mitred grating for use where a drainage channel is required to follow a right-angled change of direction The grating comprises laser-cut components, including mortises and tenons, that are assembled then welded to produce a strong, rigid, level and straight product. A feature of this new design is the appearance of continuous strips of metal running through the corner. The grating fits snugly in the stainless steel channel and, to suit site requirements, may be loose or discretely secured. l For more information visit
www.wade.eu
March 2012 CIBSE Journal 71
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84