Traditional Craftsmanship for over 100 years


Shaws have been manufacturing fireclay sinks for over 100 years, using time honoured traditional methods and materials. Each handcrafted sink is an individual product, bearing testament to the craftsmen who produce them.


Shaws sinks demonstrate the natural characteristics of fireclay ceramics and are created by a ‘slip casting’ process at our factory in the Lancashire town of Darwen. A mixture of clay and water is poured by hand into a porous mould. When the newly formed sinks are dry enough, craftsmen remove them from their moulds before hand finishing the sinks through a process of sponging and ‘fettling’ to create a smooth finish.


Following a gradual drying period of up to 40 hours, the sinks are then prepared with a ground coat before being glazed. Firing in specially designed kilns at temperatures of up to 1200 degrees centigrade completes this rigorous process.


Whilst modern technology has improved manufacturing methods over the years, the principles of this handcrafted product remain the same. Having taken two to three weeks to craft, each sink is proudly stamped with the impression of its maker and bears its own distinctive badge. Traditional craftsmanship is as important now as it was in 1897.


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33