17. Modolfo, L.F., “Aluminum Alloys: Structure and Properties”, Butterworth & Co., London, UK (1976).
18. Apelian, D., Shivkumar, S., Sigworth, G., “Fundamental Aspects of Heat Treatment of Cast Al- Si-Mg Alloys,” AFS Transactions, vol. 97, pp. 727- 742 (1989).
19. Thompson, D.S., Subramanya, B.S., Levy, S.A., “Quench Rate Effects in Aluminum-Zinc-Magnesium- Copper Alloys”, Metallurgical Transactions, vol.2, pp. 1149-1160 (1971).
20. Martin, J.W., “Precipitation Hardening (2nd ed.)”, Butterworth-Heinemann, Oxford, UK (1998).
21. Staley, J.T., “Quench Factor Analysis of Aluminum Alloys”, Material Science and Technology, vol. 3, pp. 923-935 (1987).
22. Bates, C.E., “Quench Optimization for Aluminum Alloys”, AFS Transactions, vol. 93, pp. 1045-1054 (1994).
23. Zhang, D.L., “Precipitation of Excess Silicon During Heat Treatment of Casting Al-7wt%Si-0.4wt%Mg alloy”, Materials Science Forum, vol. 217-222, pp. 1-6 (1996).
24. Nakayama, Y., Takaai, T., Jin, D., “Precipitation Behaviors of β-Phase and Changes in Mechanical Properties of Al-Mg System Alloys”, Materials Science Forum, vol. 217-222, pp. 1269-1274 (1996).
25. Gaber, Gaffar, M.A., Mostafa, M.S., Abo Zeid, E.F., “Precipitation Kinetics of Al-1.2Mg2Si-0.35 Si and Al-1.07Mg2Si-0.33Cu Alloys”, Journal of Alloys and Compounds, vol. 429, pp. 167-175 (2007).
26. Donnadieu, P., Proult, A., “Cluster-Based Models for the Crystal Structure of the Hardening Precipitates of Al-Mg-Si Alloys”, Materials Science Forum, vol. 217- 222, pp. 719-724 (1996).
27. Jeyakumar, M., Hamed, M., Shankar, S., “Heat Treatment of A356.2 Aluminum Alloy: Effect of Quench Rate and Natural Aging”, Shape Casting: The 3rd International Symposium, TMS 2009 138th Annual Meeting and Exhibition, San Francisco, CA, pp. 87-95 (2009).
28. Hernandez-Paz, F., Paray, J.B., Gruzleski, D., Emadi, Natural Ageing and Heat Treatment of A356 Aluminium Alloy, AFS Transactions, vol. 112, pp. 155-164 (2004).
29. Möller, H., Govender, G., Stumpf, W.E., “ Optimization of the T6 Heat Treatment of Rheocast Alloy A356”, 8th Annual International Conference on Transportation Weight Reduction, Pilanesberg, South Africa, pp. 19-38 (2007).
30. John L Jorstad, JLJ Technologies, personal communications.
31. Marioara, C.D., Anderson, S.J., Jansen, J., Zandbergen, H.W., “The Influence of Temperature and Storage Time at RT on Nucleation of the β” Phase in a 6082 Al-Mg-Si Alloy”, Acta Materialia, vol. 51, pp. 789-796 (2003).
32. Anderson, S.J., Zandbergen, H.W., Traeholt, C., Tundal, U., Reiso, O., “The Crystal Structure of the β” Phase in Al-Mg-Si Alloy”, Acta Materialia, vol. 46, pp. 3283-3298 (2003).
33. Miao, W.F., Laughlin, D. E., “A Differential Scanning Calorimetry Study of Aluminum Alloy 6111 with Different Pre-aging Treatments”, Journal of Materials Science Letters, vol. 19, pp. 201-203 (2000).
34. Vissers, R., van Huis M.A., et al., “The Crystal Structure of the β’ phase in Al-Mg-Si Alloys”, Acta Materialia, vol. 55, pp. 3815-3823 (2007).
35. Murayama, M., Hono, K., Saga, M., Kikuchi, K., “Atom Probe Studies on the Early Stages of Precipitation of Al-Mg-Si Alloys”, Material Science & Engineering, vol. A250, pp. 127-132 (1998).
36. Murayama, M., Hono, K., “Pre-precipitate Clusters and Precipitation Process in Al-Mg-Si Alloys”, Acta Materialia, vol. 47(5), pp. 1537-1548 (1999).
37. Seyedrezai, H., “Early Stages of Ageing in Al-Mg-Si Alloys”, M. Sc thesis, McMaster University, Hamilton, Canada (2007).
38. Miao, W.F., Laughlin, D.E., ”Effects of Cu content and Preaging on Precipitation Characteristics in Aluminum Alloy 6022”, Metallurgical and Materials Transactions A, vol. 31A, pp. 361-371 (2000).
39. Dutta, I., Allen, S.M., “A Calorimetric Study of Precipitation in Commercial Aluminum Alloy-6061”, Journal of Materials Science Letters, vol. 10(6), pp. 323-326 (1991).
40. Mulazimoglu, M., “Electrical Conductivity Studies of Cast Al-Si and Al-Si-Mg Alloys”, Ph.D. Thesis, McGill University, Montreal, Canada (1988).
41. Shivkumar, S., Ricci, S., Keller, J.C., Apelian, D., “Influence of Solution Treatment on Tensile Properties of Cast Aluminum Alloys”, Journal of Heat Treating, vol. 8(1), pp. 63-70 (1990).
42. Du Y., et al., “Diffusion Coefficients of Some Solutes in FCC and Liquid Al: Critical Evaluation and Correlation”, Materials Science and Engineering A, vol. A363, pp. 140-151 (2003).
43. Clementi, E., Raimondi, D. L., Reinhardt, W. P., Journal of Chemical Physics, vol. 47, pp. 1300-1307 (1967).
34
International Journal of Metalcasting/Fall 2011
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80