This page contains a Flash digital edition of a book.
Microscopy Product Vendors SPI Supplies


Tel: 610-436-5400 Email: sales@2spi.com URL: www.2spi.com


Vacu Prep™ II


The SPI Supplies Vacu Prep™ II is a fast, clean, high vacuum bench top evaporator with simple automated operation for evaporation or sputtering.


Companies and their Products Lambda DG-4 / DG-5 PLUS


APPLICATIONS: Fluorescence Microscopy, Ratio- metric Imaging, Wavelength Switching, Imaging Hardware, Life Sciences


FEATURES: • 0.5 msec switching between fi lters • Integrated light source and wavelength switching excitation system • Holds four or fi ve interference fi l- ters and one neutral density fi lter • Light guide output provides uniform illumination • Direct computer con- trol via parallel or serial interface


Lambda 10-3 Plasma Prep™ III


SPI Supplies Plasma Prep™ III Etcher/Asher uses low temperature dry plasma processing to remove con- tamination and organic matrix material from a wide variety of SEM and TEM specimens.


APPLICATIONS: Fluorescence Microscopy, Ratio- metric Imaging, Wavelength Switching, Imaging Hardware, Life Sciences


Osmium Plasma Coaters


Osmium Plasma Coaters produce a thin (1 nm) layer of osmium with a virtually grain-less conductive coating on samples for high resolution FESEM systems.


FEATURES: • As fast as 40 msec between adjacent fi l- ters (10 position wheel) • As fast as 31 msec between adjacent fi lters (4 position wheel) • Can control up to 3 wheels and 2 shutters, or 2 wheels and 3 shutters • Compatible with SmartShutter™ stepper-motor con- trolled shutter • Controls a variety of 12, 25, 32, and 50 mm fi lterwheels


MPC-385 / MPC-325


APPLICATIONS: Life Sciences, Micromanipulation, Electrophysiology


Sutter Instrument


Tel: 415-883-0128 Email: info@sutter.com www.sutter.com


SmartShutter™


APPLICATIONS: Shuttering, Fluorescence Micro- scopy, Life Sciences, Imaging Hardware


FEATURES: • Life tested to 100 million cycles • Complete opening time 8 msec from trigger • Select partial opening function for neutral density capability • “Soft” mode provides minimum vibration • Stand alone, or use with Sutter fi lter wheel


Lambda LS


APPLICATIONS: Microscope Illumination, Fluores- cence Microscopy, Life Sciences, Imaging Hardware, OEM Illumination


FEATURES: • Pre-aligned bulb eliminates common focusing problems • Equipped with cold mirror to pro- tect down stream optical components • Easily coupled to most microscopes • Modular construction allows use of optional liquid light guide • Accommodates Sutter fi lter wheels or SmartShutter™ within cabinet


Lambda XL


APPLICATIONS: Microscope Illumination, Fluores- cence Microscopy, Life Sciences, Imaging Hardware, OEM Illumination


FEATURES: • 10,000 hour expected lifetime for bulb • No high-voltage pulse • Highly stable output (less than ±1% fl uctuations) • Built-in driver for Sutter fi l- terwheel and SmartShutter • Low light loss through bulb life


Technical Manufacturing Corporation


Tel: 800-542-9725/978-532-6330 Email: sales@techmfg.com www.techmfg.com


STACIS® iX SEM-Base™ Vibration Cancellation Floor Platform


APPLICATIONS: Scanning electron microscopy, Life sciences, Materials science, Semiconductors


FEATURES: • Active vibration cancellation starts below 1 Hz • Extended stroke piezoelectric actuators • Platform fits most commercial SEMs • Load capacity 900 to 2,500 pounds • Compatible with internal tool vibration isolation


www.techmfg.com/products/fl oorplatforms/stacis_sem_base.html


Mag-NetX™ Magnetic Field Cancellation System APPLICATIONS: Scanning


FEATURES: • Single controller and ROE will run 2 stepper motor drive manipulators • User-friendly interface: single button access to all major functions • Accelerated mode for fast, manual manipulator movement • Defi nable 4th axis for coaxial pipette movement • Ultra-low drift, ultra-smooth movement


electron microscopy,


Transmission electron microscopy, Electron beam lithography, Ion beam lithography


FEATURES: • Dedicated controller with automated calibration • AC and DC magnetic sensor • Helmholtz coils in structural casing • Floor, wall, or tool mounting • Continuous monitoring


www.techmfg.com/products/magnetic/magnetx.htm


18


www.microscopy-today.com


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56