This page contains a Flash digital edition of a book.
Calculating Aluminum Melting Costs CAST TIP—Technical Information and Practice


Cindy Belt, AFS Energy Committee, Schaumburg, Ill. W


ithout a clear understanding of all the contributing factors, cost cutting efforts in one area of the melting operation may adversely affect other costs. Additionally, potential improvements may be overlooked


or prioritized incorrectly. A metalcasting melt department can measure and target five main areas for cost reduction: • melt loss; • energy; • labor; • maintenance and consumables; • depreciation.


Calculating Melt Loss Any time you melt metal, losses will occur due to oxida-


tion. Furnace practices and equipment have a major effect on these losses. Ideally, each load charged to a furnace and each cast-


ing run should be accurately weighed. At least two out of three measurements should be made within the department: pounds in and pounds out or pounds dross. Estimations, such as conveyor loads or average charge loads, may be used in some cases. If these estimates are used, they must be rechecked periodically, as changes will occur over time. The calculation of melt loss (pounds in minus pounds out,


divided by pounds in) depends on how dross is handled. Metalcasters can sell dross (equation 1) or send it out so the aluminum can be recovered for a tolling cost (equation 2). (Note: The tolling costs in the second equation should include the costs of shipping dross out and returning the recovered aluminum. All weights are in pounds; costs are in dollars per pound.) Eq. 1. Total Cost = % Melt Loss x Aluminum Cost – % Melt Loss x Dross Price Eq. 2. Total Cost = % Melt Loss x


Aluminum Cost + % Melt Loss x Toll Cost – % Melt Loss x % Metal Recovery x Aluminum Cost


Calculating Energy Costs Equipment, maintenance and furnace practices all af-


fect energy costs. While a basic cost, it is only sporadically measured within a melt department. At a minimum, the department needs a gas meter. Since each furnace is different, each process should be measured. Meters must be maintained and read at least once a month. Be aware of internal conventions, such as reporting data by


60


Melting Cost Example Description Melt Loss Energy Labor


calendar months, billing months or fiscal months. Ensure the time period between meter readings coincides with the measurement of the pounds and includes both melt- ing and holding energy usage. Contact your natural gas company to obtain the heat content of the natural gas you are purchasing. A furnace may have a combustion blower, damper


blower, floor blower, baghouse blower, conveyor motors and a pump motor, and their electric costs also should be measured. Other gases used at the furnace, including nitrogen, chlorine and oxygen, can be included within this section.


Natural Gas Cost = Gas Usage (mcf/month) x Heat Content (BTU/cf) x 1,000 (cf/mcf) x Dollars per Dth / Pounds In / 1,000,000 (BTU/Dth)


Electricity Cost = Electric Usage (kWh/month) x Dollars per kWh / Pounds In


Total Energy Cost = Natural Gas Cost + Electricity Cost


Calculating Labor Costs The labor required for the melting operation includes


anyone who is charging, skimming, cleaning or casting from the furnace. Labor is sometimes reduced by automatic charging or casting equipment. Labor Cost = Annual Labor Cost / Annual Pounds In


Calculating Maintenance and Consumables Costs The largest consumable expense is refractory. Refrac-


tory life can be detrimentally affected by operator practice, equipment and furnace design. Other consumable items in a furnace can include pump parts, doors and thermocouples. Labor for maintenance work should be included within this calculation.


Maintenance/Consumable Cost = Average Annual Cost / Annual Pounds In


Calculating Depreciation


Maintenance & Consumables $0.0028 Depreciation Total


$0.0011 $0.0337


Deprecation of the furnace, along with related charging equipment, pumps, baghouses, etc., should be included. The values used can vary from facility to facility. For instance, many furnaces that have been fully depreciated are still running, while depreciation might alter- natively be charged to the melt depart- ment for equipment that has long been removed from service. (Note: Service life should be measured in years.) Depreciation Cost = (Furnace Cost / Service Life + Pump Cost / Service Life + Charging Equipment Cost / Service Life) / Annual Pounds In


Cost per lb. $0.016


$0.0096 $0.0042


MC MODERN CASTING / November 2010


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116  |  Page 117  |  Page 118  |  Page 119  |  Page 120  |  Page 121  |  Page 122  |  Page 123  |  Page 124  |  Page 125  |  Page 126  |  Page 127  |  Page 128  |  Page 129  |  Page 130  |  Page 131  |  Page 132  |  Page 133  |  Page 134  |  Page 135  |  Page 136  |  Page 137  |  Page 138  |  Page 139  |  Page 140  |  Page 141  |  Page 142  |  Page 143  |  Page 144  |  Page 145  |  Page 146  |  Page 147  |  Page 148  |  Page 149  |  Page 150  |  Page 151  |  Page 152  |  Page 153  |  Page 154  |  Page 155  |  Page 156  |  Page 157  |  Page 158  |  Page 159  |  Page 160  |  Page 161  |  Page 162  |  Page 163  |  Page 164  |  Page 165  |  Page 166  |  Page 167  |  Page 168  |  Page 169  |  Page 170  |  Page 171  |  Page 172  |  Page 173  |  Page 174  |  Page 175  |  Page 176  |  Page 177  |  Page 178  |  Page 179  |  Page 180  |  Page 181  |  Page 182  |  Page 183  |  Page 184  |  Page 185  |  Page 186  |  Page 187  |  Page 188  |  Page 189  |  Page 190  |  Page 191  |  Page 192  |  Page 193  |  Page 194  |  Page 195  |  Page 196