T870 COMPACT TRACK LOADER HIGHLIGHTS
• Rated operating capacity: 3325 lb. (1508 kg)* • Tipping load: 9500 lb. (4309 kg) • Operating weight: 12,678 lb. (5751 kg) • Lift path: Vertical
• Horsepower: 99.2 hp (73,9 kW) • Engine: Tier 3
• Height: 6 ft. 11 in. (2,1 m) • Width with bucket: 7 ft. 1 in. (2,2 m) • Length with bucket: 12 ft. 10 in. (3,9 m) • Lift height to hinge pin: 12 ft. (3,6 m) • Maximum travel speed: 7.2 mph (11,6 km/hr) • Auxiliary hydraulic fl ow: 23.8 gpm (90,1 L/min) • High-fl ow option: 37.4 gpm (141.6 L/min) • Ground pressure (standard): 4.7 psi (32,4 kPa) • Roller SuspensionTM
system: Standard
• Bobcat Standard Controls with Power Assist: Standard
• Selectable Joystick Controls (SJC): Available
This M-Series T870 and new planer attachment are a smart investment for road maintenance and parking lot pavement restoration.
system with an oil cooler that swings up and is held by a support bar, enabling cleaning between the oil cooler and radiator.
Comfort Getting operators into an M-Series loader isn’t a
problem. Getting them out might be. That’s because M-Series loaders take comfort to a new level. The cab was completely re-engineered and overall cab size has been increased by 10 percent to give operators more space inside and accommodate different-sized operators.
Dirt and dust that may enter the cab have been minimized with a best-in-class pressurized cab with a new one-piece seal that goes all the way around the door and fi ts into a special curved pocket for an improved door seal.
M-Series loaders are also quieter than previous models (sound levels have decreased by 60 percent) with new mounts that isolate the engine from other
NEW: STANDARD CONTROLS WITH POWER ASSIST Bobcat®
S850 and T870 loaders are equipped with Standard Controls with Power Assist to help handle
the bigger, heavier and more powerful machines. Steering control handles initiate forward and reverse drive motions while foot pedals still control lift, arm and bucket functions. Operators will appreciate the steering handles, which help minimize fatigue by signifi cantly lowering lever effort forces.
Features previously available only with Selectable Joystick Controls (SJC) can now be utilized with the new steering handles. They include horsepower management, speed management, drive response and drift compensation — all of which were previously only available with SJC — to enhance loader effi ciency. Read more about these loader joystick control features and their benefi ts online at
www.MyWorkSaver.com/loaders
6 WorkSaver Fall 2010
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32